Aligning FUNC/PERF keywords - Data driven

[csit.git] / tests / vpp / device / container_memif / eth2p-eth-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot

diff --git a/tests/vpp/device/container_memif/eth2p-eth-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-eth-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot
deleted file mode 100644 (file)
index 62ca150..0000000
--- a/tests/vpp/device/container_memif/eth2p-eth-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot
+++ /dev/null
@@ -1,83 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER
-| ...
-| Suite Setup | Setup suite single link | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace | container
-| ...
-| Documentation | *L2 bridge-domain test cases with memif interface*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \
-| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all \
-| ... | links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain \
-| ... | switching. Container is connected to VPP via Memif interface. \
-| ... | Container is running same VPP version as running on DUT.
-| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets \
-| ... | are sent in both directions by TG on links to DUT1 and via container; \
-| ... | on receive TG verifies packets for correctness and their IPv4 (IPv6) \
-| ... | src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC792
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${nic_name}= | virtual
-| ${overhead}= | ${0}
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_functional
-
-*** Test Cases ***
-| tc01-eth2p-ethip4-l2bdbase-eth-2memif-1dcr-dev
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv4 Echo Reqs in both directions between two\
-| | ... | of its interfaces to be switched by DUT to and from docker; verify\
-| | ... | all packets are received.
-| | ...
-| | Set Test Variable | ${frame_size} | ${42}
-| | Set Test Variable | ${rxq_count_int} | ${1}
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Start containers for test | auto_scale=${False} | pinning=${False}
-| | And Initialize L2 Bridge Domain with memif pairs | auto_scale=${False}
-| | Then Send ICMPv4 bidirectionally and verify received packets
-| | ... | ${tg} | ${tg_if1} | ${tg_if2}
-
-| tc02-eth2p-ethip6-l2bdbase-eth-2memif-1dcr-dev
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv6 Echo Reqs in both directions between two\
-| | ... | of its interfaces to be switched by DUT to and from docker; verify\
-| | ... | all packets are received.
-| | ...
-| | Set Test Variable | ${frame_size} | ${62}
-| | Set Test Variable | ${rxq_count_int} | ${1}
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Start containers for test | auto_scale=${False} | pinning=${False}
-| | And Initialize L2 Bridge Domain with memif pairs | auto_scale=${False}
-| | Then Send ICMPv6 bidirectionally and verify received packets
-| | ... | ${tg} | ${tg_if1} | ${tg_if2}