vpp_device: Multiple NICs (suitegen)

[csit.git] / tests / vpp / device / container_memif / eth2p-ethipv6-ip6base-eth-2memif-1dcr-dev.robot

diff --git a/tests/vpp/device/container_memif/eth2p-ethipv6-ip6base-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethipv6-ip6base-eth-2memif-1dcr-dev.robot
deleted file mode 100644 (file)
index 5693964..0000000
--- a/tests/vpp/device/container_memif/eth2p-ethipv6-ip6base-eth-2memif-1dcr-dev.robot
+++ /dev/null
@@ -1,120 +0,0 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethipv6-ip6base-eth-2memif-1dcr
-|
-| Suite Setup | Setup suite topology interfaces | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace | container
-|
-| Test Template | Local Template
-|
-| Documentation | *IPv4 routing test cases with memif interface*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing on \
-| ... | both links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \
-| ... | two static IPv6 /64 route entries. Container is connected to VPP via \
-| ... | Memif interface. Container is running same VPP version as running on \
-| ... | DUT.
-| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \
-| ... | by TG on links to DUT1 and via container; on receive TG verifies \
-| ... | packets for correctness and their IPv6 src-addr, dst-addr and \
-| ... | MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${overhead}= | ${0}
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_functional
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Ver] Make TG send IPv6 packets in both directions between two\
-| | ... | of its interfaces to be routed by DUT to and from docker; verify\
-| | ... | all packets are received.
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Start containers for test | auto_scale=${False} | pinning=${False}
-| | And Set up memif interfaces on DUT node
-| | ... | ${dut1} | memif-DUT1_CNF | memif-DUT1_CNF
-| | ... | memif_if1=memif_if1 | memif_if2=memif_if2
-| | ... | rxq=${rxq_count_int} | txq=${rxq_count_int}
-| | # It takes some time for memifs to go up.
-| | And Set interfaces in path up
-| | And Add Fib Table | ${dut1} | 20 | ipv6=${True}
-| | And Assign Interface To Fib Table
-| | ... | ${dut1} | ${memif_if2} | 20 | ipv6=${True}
-| | And Assign Interface To Fib Table
-| | ... | ${dut1} | ${DUT1_${int}2}[0] | 20 | ipv6=${True}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${DUT1_${int}1}[0] | 2001:1::1 | 64
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${memif_if1} | 2001:2::1 | 64
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${memif_if2} | 2001:2::2 | 64
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${DUT1_${int}2}[0] | 2001:3::1 | 64
-| | ${memif_if2_key}= | Get interface by sw index | ${nodes['DUT1']}
-| | ... | ${memif_if2}
-| | ${memif_if2_mac}= | Get interface MAC | ${nodes['DUT1']} | ${memif_if2_key}
-| | And Vpp Route Add
-| | ... | ${dut1} | 2001:3::0 | 64 | gateway=2001:2::2 | interface=${memif_if1}
-| | And Vpp Route Add
-| | ... | ${dut1} | 2001:1::0 | 64 | gateway=2001:2::2 | interface=${memif_if2}
-| | ... | vrf=20
-| | VPP Add IP Neighbor
-| | ... | ${dut1} | ${memif_if1} | 2001:2::2 | ${memif_if2_mac}
-| | VPP Add IP Neighbor
-| | ... | ${dut1} | ${DUT1_${int}2}[0] | 2001:3::2 | ${TG_pf2_mac}[0]
-| | Then Send packet and verify headers
-| | ... | ${tg} | 2001:1::1 | 2001:3::2
-| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
-| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
-
-*** Test Cases ***
-| 78B-ethipv6-ip6base-eth-2memif-1dcr-dev
-| | [Tags] | 78B
-| | frame_size=${78} | phy_cores=${0}