feat(CpuUtils): Allow suites to forbid siblings

[csit.git] / tests / vpp / device / crypto / eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot

diff --git a/tests/vpp/device/crypto/eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot b/tests/vpp/device/crypto/eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
deleted file mode 100644 (file)
index 648bb17..0000000
--- a/tests/vpp/device/crypto/eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
+++ /dev/null
@@ -1,93 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | IP4FWD | IPSEC | IPSECSW | IPSECTUN | IP4BASE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
-| ...
-| Suite Setup | Setup suite single link | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | *IPv4 IPsec tunnel mode test suite.*
-| ...
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
-| ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\
-| ... | loopback an physical interface IPv4 addresses, static ARP record, route\
-| ... | and IPsec manual keyed connection in tunnel mode.
-| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\
-| ... | is received on TG from DUT1.
-| ... | *[Ref] Applicable standard specifications:* RFC4303.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
-| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${nic_name}= | virtual
-| ${nic_driver}= | vfio-pci
-| ${overhead}= | ${54}
-| ${tg_spi}= | ${1000}
-| ${dut_spi}= | ${1001}
-| ${ESP_PROTO}= | ${50}
-| ${tg_if_ip4}= | 192.168.100.2
-| ${dut_if_ip4}= | 192.168.100.3
-| ${tg_lo_ip4}= | 192.168.3.3
-| ${dut_lo_ip4}= | 192.168.4.4
-| ${ip4_plen}= | ${24}
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\
-| | ... | mode.
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | # These are enums (not strings) so they cannot be in Variables table.
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA 512 256
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Initialize layer driver | ${nic_driver}
-| | And Configure topology for IPv4 IPsec testing
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | And Configure manual keyed connection for IPSec
-| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
-| | ... | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
-| | ... | ${dut_tun_ip}
-
-*** Test Cases ***
-| tc01-110B-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev
-| | [Tags] | 110B
-| | frame_size=${110} | phy_cores=${0}