Support suite tags in autogen

[csit.git] / tests / vpp / device / crypto / eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot

diff --git a/tests/vpp/device/crypto/eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot b/tests/vpp/device/crypto/eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
index 72ba593..ee7c607 100644 (file)
--- a/tests/vpp/device/crypto/eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
+++ b/tests/vpp/device/crypto/eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
@@ -13,19 +13,20 @@
 
 *** Settings ***
 | Resource | resources/libraries/robot/shared/default.robot
-| ...
+|
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
 | ... | NIC_Virtual | IP4FWD | IPSEC | IPSECSW | IPSECTUN | IP4BASE
 | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
-| ...
+| ... | ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256
+|
 | Suite Setup | Setup suite single link | scapy
 | Test Setup | Setup test
 | Test Teardown | Tear down test | packet_trace
-| ...
+|
 | Test Template | Local Template
-| ...
+|
 | Documentation | *IPv4 IPsec tunnel mode test suite.*
-| ...
+|
 | ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
 | ... | between nodes.
 | ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\
@@ -45,10 +46,11 @@
 | ${tg_spi}= | ${1000}
 | ${dut_spi}= | ${1001}
 | ${ESP_PROTO}= | ${50}
-| ${tg_if_ip4}= | 192.168.100.2
-| ${dut_if_ip4}= | 192.168.100.3
-| ${tg_lo_ip4}= | 192.168.3.3
-| ${dut_lo_ip4}= | 192.168.4.4
+| ${tg_if1_ip4}= | 192.168.100.2
+| ${tg_if2_ip4}= | 192.168.4.4
+| ${dut_if1_ip4}= | 192.168.100.3
+| ${dut_if2_ip4}= | 192.168.4.3
+| ${tg_host_ip4}= | 192.168.3.3
 | ${ip4_plen}= | ${24}
 
 *** Keywords ***
@@ -57,20 +59,20 @@
 | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
 | | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\
 | | ... | mode.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer
 | | ... | - phy_cores - Number of physical cores. Type: integer
 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
 | | Set Test Variable | \${frame_size}
-| | ...
+| |
 | | # These are enums (not strings) so they cannot be in Variables table.
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA 512 256
-| | ...
+| |
 | | Given Set Max Rate And Jumbo
 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
 | | And Pre-initialize layer driver | ${nic_driver}
@@ -81,12 +83,12 @@
 | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | And Configure manual keyed connection for IPSec
 | | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${tg_dst_ip} | ${tg_src_ip}
 | | ... | ${dut_tun_ip} | ${tg_tun_ip}
 | | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac}
+| | ... | ${tg} | ${tg_if1} | ${tg_if2} | ${dut1_if1_mac} | ${dut1_if2_mac}
 | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${tg_dst_ip} | ${tg_tun_ip}
 | | ... | ${dut_tun_ip}
 
 *** Test Cases ***