FIX: do not use ping in vpp-device tests

[csit.git] / tests / vpp / device / crypto / eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot

diff --git a/tests/vpp/device/crypto/eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot b/tests/vpp/device/crypto/eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
index 2e43f71..26f19cb 100644 (file)
--- a/tests/vpp/device/crypto/eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
+++ b/tests/vpp/device/crypto/eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
@@ -16,7 +16,7 @@
 | ...
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
 | ... | NIC_Virtual | IP4FWD | IPSEC | IPSECSW | IPSECTPT | IP4BASE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
 | ...
 | Suite Setup | Setup suite single link | scapy
 | Test Setup | Setup test
@@ -38,16 +38,18 @@
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
 | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
 | ${nic_name}= | virtual
 | ${nic_driver}= | vfio-pci
 | ${overhead}= | ${54}
 | ${tg_spi}= | ${1000}
 | ${dut_spi}= | ${1001}
 | ${ESP_PROTO}= | ${50}
-| ${tg_if_ip4}= | 192.168.100.2
-| ${dut_if_ip4}= | 192.168.100.3
-| ${tg_lo_ip4}= | 192.168.3.3
-| ${dut_lo_ip4}= | 192.168.4.4
+| ${tg_if1_ip4}= | 192.168.100.2
+| ${tg_if2_ip4}= | 192.168.4.4
+| ${dut_if1_ip4}= | 192.168.100.3
+| ${dut_if2_ip4}= | 192.168.4.3
+| ${tg_host_ip4}= | 192.168.3.3
 | ${ip4_plen}= | ${24}
 
 *** Keywords ***
@@ -70,20 +72,21 @@
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA 512 256
 | | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs | with_trace=${True}
 | | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
 | | And Configure topology for IPv4 IPsec testing
 | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | And Configure manual keyed connection for IPSec
 | | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${tg_dst_ip} | ${tg_src_ip}
 | | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac}
+| | ... | ${tg} | ${tg_if1} | ${tg_if2} | ${dut1_if1_mac} | ${dut1_if2_mac}
 | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${tg_dst_ip}
 
 *** Test Cases ***
 | tc01-110B-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev