Perf: Add perfmon_plugin for telemetry

[csit.git] / tests / vpp / device / crypto / eth2p-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev.robot

diff --git a/tests/vpp/device/crypto/eth2p-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev.robot b/tests/vpp/device/crypto/eth2p-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev.robot
index e410708..15f1d8a 100644 (file)
--- a/tests/vpp/device/crypto/eth2p-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev.robot
+++ b/tests/vpp/device/crypto/eth2p-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -13,19 +13,21 @@
 
 *** Settings ***
 | Resource | resources/libraries/robot/shared/default.robot
-| ...
+|
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
 | ... | NIC_Virtual | IP6FWD | IPSEC | IPSECSW | IPSECTUN | IP6BASE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
-| ...
-| Suite Setup | Setup suite single link | scapy
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256
+|
+| Suite Setup | Setup suite topology interfaces | scapy
 | Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace
-| ...
+| Test Teardown | Tear down test | packet_trace | ipsec_sa
+|
 | Test Template | Local Template
-| ...
+|
 | Documentation | *IPv6 IPsec tunnel mode test suite.*
-| ...
+|
 | ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
 | ... | between nodes.
 | ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure
@@ -36,18 +38,25 @@
 | ... | *[Ref] Applicable standard specifications:* RFC4303.
 
 *** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
-| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
 | ${nic_name}= | virtual
 | ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
 | ${overhead}= | ${54}
 | ${tg_spi}= | ${1000}
 | ${dut_spi}= | ${1001}
 | ${ESP_PROTO}= | ${50}
-| ${tg_if_ip6}= | 3ffe:5f::1
-| ${dut_if_ip6}= | 3ffe:5f::2
-| ${tg_lo_ip6}= | 3ffe:60::3
-| ${dut_lo_ip6}= | 3ffe:60::4
+| ${tg_if1_ip6}= | 3ffe:5f::1
+| ${tg_if2_ip6}= | 3ffe:60::4
+| ${dut_if1_ip6}= | 3ffe:5f::2
+| ${dut_if2_ip6}= | 3ffe:60::3
+| ${tg_host_ip6}= | 3ffe:61::3
 | ${ip6_plen}= | ${64}
 | ${ip6_plen_rt}= | ${128}
 
@@ -57,38 +66,40 @@
 | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
 | | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\
 | | ... | mode.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer
 | | ... | - phy_cores - Number of physical cores. Type: integer
 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
 | | Set Test Variable | \${frame_size}
-| | ...
+| |
 | | # These are enums (not strings) so they cannot be in Variables table.
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA 512 256
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs | with_trace=${True}
 | | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
 | | And Configure topology for IPv6 IPsec testing
 | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | And Configure manual keyed connection for IPSec
-| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${tg_dst_ip} | ${tg_src_ip}
 | | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE}
 | | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${DUT1_vf1_mac}[0] | ${DUT1_vf2_mac}[0]
 | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${tg_dst_ip} | ${tg_tun_ip}
 | | ... | ${dut_tun_ip}
 
 *** Test Cases ***
-| tc01-124B-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev
+| 124B-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev
 | | [Tags] | 124B
 | | frame_size=${124} | phy_cores=${0}