FIX: do not use ping in vpp-device tests

[csit.git] / tests / vpp / device / ip4 / eth2p-ethicmpv4-ip4base-dev.robot

diff --git a/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dev.robot b/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dev.robot
deleted file mode 100644 (file)
index 858f4f3..0000000
--- a/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dev.robot
+++ /dev/null
@@ -1,85 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE | DRV_VFIO_PCI
-| ...
-| Suite Setup | Setup suite single link | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | *IPv4 routing test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for IPv4 routing on \
-| ... | both links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
-| ... | two static IPv4 /24 route entries.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \
-| ... | one direction by TG on links to DUT1; on receive TG verifies packets \
-| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | virtual
-| ${nic_driver}= | vfio-pci
-| ${overhead}= | ${0}
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv4 Echo Req routed over DUT1 interfaces.\
-| | ... | Make TG verify ICMPv4 Echo Reply is correct.
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize IPv4 forwarding in circular topology
-| | ... | remote_host1_ip=192.168.0.1 | remote_host2_ip=192.168.0.2
-| | Then Send IPv4 ping packet and verify headers
-| | ... | ${tg} | ${tg_if1} | ${dut1} | ${dut1_if2}
-| | ... | 10.10.10.2 | 20.20.20.1 | ${dut1_if1_mac} | ${0}
-| | Then Send IPv4 ping packet and verify headers
-| | ... | ${tg} | ${tg_if1} | ${dut1} | ${dut1_if1}
-| | ... | 10.10.10.2 | 10.10.10.1 | ${dut1_if1_mac} | ${0}
-| | Then Send IPv4 ping packet and verify headers
-| | ... | ${tg} | ${tg_if1} | ${tg} | ${tg_if2}
-| | ... | 10.10.10.2 | 20.20.20.2 | ${dut1_if1_mac} | ${1}
-| | Then Send IPv4 ping packet and verify headers
-| | ... | ${tg} | ${tg_if1} | ${tg} | ${tg_if2}
-| | ... | 192.168.0.1 | 192.168.0.2 | ${dut1_if1_mac} | ${1}
-
-*** Test Cases ***
-| tc01-64B-ethicmpv4-ip4base-dev
-| | [Tags] | 64B
-| | frame_size=${64} | phy_cores=${0}