FIX: use len parameter name in prefix structure in ip_route_add_del

[csit.git] / tests / vpp / device / ip4 / eth2p-ethip4-ip4base-dev.robot

diff --git a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot
index 22bb4c3..23a5b76 100644 (file)
--- a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot
+++ b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -12,17 +12,17 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/ip/ip4.robot
 | Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/ip/ip4.robot
 | Resource | resources/libraries/robot/shared/interfaces.robot
 | Resource | resources/libraries/robot/shared/traffic.robot
 | ...
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV
 | ... | FUNCTEST | IP4FWD | BASE | ETH | IP4BASE
 | ...
-| Test Setup | Set up VPP device test
-| ...
-| Test Teardown | Tear down VPP device test
+| Suite Setup | Setup suite single link
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
 | ...
 | Documentation | *IPv4 routing test cases*
 | ...
@@ -38,6 +38,8 @@
 | ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
 
 *** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${nic_name}= | virtual
 | ${tg_to_dut_if1_ip4}= | 10.10.10.2
 | ${tg_to_dut_if2_ip4}= | 20.20.20.2
 | ${dut_to_tg_if1_ip4}= | 10.10.10.1
@@ -54,7 +56,10 @@
 | | ...
 | | ${hops}= | Set Variable | ${0}
 | | ...
-| | Given Configure path in 2-node circular topology
+| | Given Add PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP Enable Traces On All Duts | ${nodes}
+| | When Configure path in 2-node circular topology
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
 | | And Configure IPv4 forwarding in circular topology | ${tg_to_dut_if1_ip4}
 | | ... | ${tg_to_dut_if2_ip4} | ${dut_to_tg_if1_ip4} | ${dut_to_tg_if2_ip4}
@@ -63,6 +68,7 @@
 | | ... | ${tg_to_dut_if1} | ${dut_node} | ${dut_to_tg_if1}
 | | ... | ${tg_to_dut_if1_ip4} | ${dut_to_tg_if1_ip4} | ${dut_to_tg_if1_mac}
 | | ... | ${hops}
+| | Get interface Ipv4 addresses | ${nodes['DUT1']} | ${dut_to_tg_if1}
 
 | tc02-eth2p-ethicmpv4-ip4base-device_echo-req-to-dut-egress-interface
 | | [Documentation]
@@ -71,7 +77,10 @@
 | | ...
 | | ${hops}= | Set Variable | ${0}
 | | ...
-| | Given Configure path in 2-node circular topology
+| | Given Add PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP Enable Traces On All Duts | ${nodes}
+| | When Configure path in 2-node circular topology
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
 | | And Configure IPv4 forwarding in circular topology | ${tg_to_dut_if1_ip4}
 | | ... | ${tg_to_dut_if2_ip4} | ${dut_to_tg_if1_ip4} | ${dut_to_tg_if2_ip4}
@@ -89,7 +98,10 @@
 | | ...
 | | ${hops}= | Set Variable | ${1}
 | | ...
-| | Given Configure path in 2-node circular topology
+| | Given Add PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP Enable Traces On All Duts | ${nodes}
+| | When Configure path in 2-node circular topology
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
 | | And Configure IPv4 forwarding in circular topology | ${tg_to_dut_if1_ip4}
 | | ... | ${tg_to_dut_if2_ip4} | ${dut_to_tg_if1_ip4} | ${dut_to_tg_if2_ip4}
@@ -107,13 +119,17 @@
 | | ...
 | | ${hops}= | Set Variable | ${1}
 | | ...
-| | Given Configure path in 2-node circular topology
+| | Given Add PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP Enable Traces On All Duts | ${nodes}
+| | When Configure path in 2-node circular topology
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
 | | And Configure IPv4 forwarding in circular topology | ${tg_to_dut_if1_ip4}
 | | ... | ${tg_to_dut_if2_ip4} | ${dut_to_tg_if1_ip4} | ${dut_to_tg_if2_ip4}
 | | ... | remote_host1_ip4=${remote_host1_ip4}
 | | ... | remote_host2_ip4=${remote_host2_ip4}
 | | ... | remote_host_ip4_prefix=${remote_host_ip4_prefix}
+| | And VPP Get IP tables | ${dut_node}
 | | When All Vpp Interfaces Ready Wait | ${nodes}
 | | Then Send IPv4 ping packet and verify headers | ${tg_node}
 | | ... | ${tg_to_dut_if1} | ${tg_node} | ${tg_to_dut_if2}