vpp_device: Multiple NICs (infra)

[csit.git] / tests / vpp / device / ip4 / eth2p-ethip4-ip4base-ipolicemarkbase-dev.robot

diff --git a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-ipolicemarkbase-dev.robot b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-ipolicemarkbase-dev.robot
index 4b7bf01..042d986 100644 (file)
--- a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-ipolicemarkbase-dev.robot
+++ b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-ipolicemarkbase-dev.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -15,10 +15,11 @@
 | Resource | resources/libraries/robot/shared/default.robot
 |
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP4FWD | FEATURE | POLICE_MARK | DRV_VFIO_PCI
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | POLICE_MARK | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
 | ... | ethip4-ip4base-ipolicemarkbase
 |
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
 | Test Setup | Setup test
 | Test Teardown | Tear down test | packet_trace | classify
 |
@@ -37,10 +38,14 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2474, RFC2697, RFC2698.
 
 *** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
 | ${crypto_type}= | ${None}
-| ${nic_name}= | virtual
+| ${nic_name}= | Intel-X710
 | ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
 | ${overhead}= | ${0}
 | ${cir}= | ${100}
 | ${eir}= | ${150}
@@ -59,14 +64,9 @@
 | |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
 | |
-| | ${cb}= | Get Average Frame Size | ${frame_size}
-| | ${eb}= | Get Average Frame Size | ${frame_size}
-| |
 | | Set Test Variable | \${frame_size}
-| | Set Test Variable | \${cb}
-| | Set Test Variable | \${eb}
-| |
 | | Given Set Max Rate And Jumbo
+| | And Set Rates For Policer
 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
 | | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs | with_trace=${True}
@@ -75,10 +75,11 @@
 | | And Initialize IPv4 forwarding in circular topology
 | | And Initialize IPv4 policer 2r3c-'ca' in circular topology
 | | Then Send packet and verify marking
-| | ... | ${tg} | ${tg_if1} | ${tg_if2} | ${tg_if1_mac} | ${dut1_if1_mac}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
 | | ... | 10.10.10.2 | 20.20.20.2
 
 *** Test Cases ***
-| tc01-64B-ethip4-ip4base-ipolicemarkbase-dev
+| 64B-ethip4-ip4base-ipolicemarkbase-dev
 | | [Tags] | 64B
 | | frame_size=${64} | phy_cores=${0}