Perf: Add perfmon_plugin for telemetry

[csit.git] / tests / vpp / device / ip4_tunnels / eth2p-ethip4vxlan-l2xcbase-dev.robot

diff --git a/tests/vpp/device/ip4_tunnels/eth2p-ethip4vxlan-l2xcbase-dev.robot b/tests/vpp/device/ip4_tunnels/eth2p-ethip4vxlan-l2xcbase-dev.robot
index e3fb0c9..7e2bc84 100644 (file)
--- a/tests/vpp/device/ip4_tunnels/eth2p-ethip4vxlan-l2xcbase-dev.robot
+++ b/tests/vpp/device/ip4_tunnels/eth2p-ethip4vxlan-l2xcbase-dev.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -13,19 +13,21 @@
 
 *** Settings ***
 | Resource | resources/libraries/robot/shared/default.robot
-| ...
+|
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
 | ... | NIC_Virtual | L2XCBASE | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
 | ... | DRV_VFIO_PCI
-| ...
-| Suite Setup | Setup suite single link | scapy
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4vxlan-l2xcbase
+|
+| Suite Setup | Setup suite topology interfaces | scapy
 | Test Setup | Setup test
 | Test Teardown | Tear down test | packet_trace
-| ...
+|
 | Test Template | Local Template
-| ...
+|
 | Documentation | *L2XC with VXLANoIPv4 test cases*
-| ...
+|
 | ... | *[Top] Network topologies:* TG-DUT1-TG 2-node circular topology\
 | ... | with single links between nodes.
 | ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on\
@@ -38,10 +40,14 @@
 | ... | *[Ref] Applicable standard specifications:* RFC7348.
 
 *** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
 | ${crypto_type}= | ${None}
 | ${nic_name}= | virtual
 | ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
 | ${overhead}= | ${50}
 
 *** Keywords ***
@@ -49,16 +55,16 @@
 | | [Documentation]
 | | ... | [Ver] Make TG send VXLAN encapsulated Ethernet frame; verify\
 | | ... | all packets are received.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer
 | | ... | - phy_cores - Number of physical cores. Type: integer
 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
 | | Set Test Variable | \${frame_size}
-| | ...
+| |
 | | Given Set Max Rate And Jumbo
 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
 | | And Pre-initialize layer driver | ${nic_driver}
@@ -68,10 +74,11 @@
 | | And Initialize layer ip4vxlan
 | | And Initialize L2 cross connect
 | | Then Send VXLAN encapsulated packet and verify received packet
-| | ... | ${tg} | ${tg_if1} | ${tg_if2} | ${tg_if1_mac} | ${dut1_if1_mac}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
 | | ... | 172.17.0.2 | 172.16.0.1 | ${0} | 172.26.0.1 | 172.27.0.2 | ${0}
 
 *** Test Cases ***
-| tc01-114B-ethip4vxlan-l2xcbase-dev
+| 114B-ethip4vxlan-l2xcbase-dev
 | | [Tags] | 114B
 | | frame_size=${114} | phy_cores=${0}