Remove leading tc[nn] from test names

[csit.git] / tests / vpp / device / ip6_tunnels / lisp / eth2p-ethip6lispgpe-ip4base-dev.robot

diff --git a/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot b/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot
index f80338e..c2f01c3 100644 (file)
--- a/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot
+++ b/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2020 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -13,20 +13,22 @@
 
 *** Settings ***
 | Resource | resources/libraries/robot/shared/default.robot
-| ...
+|
 | Variables | resources/test_data/lisp/lisp.py
-| ...
+|
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | IP6FWD | LISPGPE_IP4o6 | DRV_VFIO_PCI
-| ...
-| Suite Setup | Setup suite single link | scapy
+| ... | NIC_Virtual | IP6FWD | LISP | LISPGPE_IP4o6 | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip6lispgpe-ip4base
+|
+| Suite Setup | Setup suite topology interfaces | scapy
 | Test Setup | Setup test
 | Test Teardown | Tear down test | packet_trace
-| ...
+|
 | Test Template | Local Template
-| ...
+|
 | Documentation | *ip6-lispgpe-ip4 encapsulation test cases*
-| ...
+|
 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular\
 | ... | topology with single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPv4-ICMPv4\
@@ -45,6 +47,10 @@
 | ${crypto_type}= | ${None}
 | ${nic_name}= | virtual
 | ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
 | ${overhead}= | ${54}
 | ${ot_mode}= | 4to6
 | ${is_gpe}= | ${1}
@@ -53,16 +59,16 @@
 | Local Template
 | | [Documentation]
 | | ... | [Cfg] On DUT1 configure LISP.\
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer
 | | ... | - phy_cores - Number of physical cores. Type: integer
 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
 | | Set Test Variable | \${frame_size}
-| | ...
+| |
 | | Given Set Max Rate And Jumbo
 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
 | | And Pre-initialize layer driver | ${nic_driver}
@@ -72,16 +78,16 @@
 | | And Configure topology for IPv4 LISPoIP6 testing
 | | And Vpp All RA Suppress Link Layer | ${nodes}
 | | And Configure LISP in 2-node circular topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid}
 | | ... | ${dut1_ip4o6_static_adjacency} | ${is_gpe}
 | | Then Send packet and verify LISPoTunnel encap
 | | ... | ${tg} | ${tg_if1_ip4} | ${dst_ip4}
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
 | | ... | ${src_rloc6} | ${dst_rloc6} | ${ot_mode}
 
 *** Test Cases ***
-| tc01-46B-ethip6lispgpe-ip4base-dev
+| 46B-ethip6lispgpe-ip4base-dev
 | | [Tags] | 46B
 | | frame_size=${46} | phy_cores=${0}