-# Copyright (c) 2018 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
# limitations under the License.
*** Settings ***
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV
-| ... | FUNCTEST | L2BDMACLRN | BASE | ETH | ICMP
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | ETH | L2BDMACLRN | BASE | ICMP
| ...
-| Test Setup | Set up VPP device test
-| ...
-| Test Teardown | Tear down VPP device test
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
| ...
| Documentation | *L2 bridge-domain test cases*
| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of\
-| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all\
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \
+| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all \
| ... | links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain \
| ... | switching.
-| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets\
-| ... | are sent in both directions by TG on links to DUT1; on receive TG\
-| ... | verifies packets for correctness and their IPv4 (IPv6) src-addr,\
+| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets \
+| ... | are sent in both directions by TG on links to DUT1; on receive TG \
+| ... | verifies packets for correctness and their IPv4 (IPv6) src-addr, \
| ... | dst-addr and MAC addresses.
| ... | *[Ref] Applicable standard specifications:* RFC792
*** Variables ***
-| ${bd_id}= | 1
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${nic_name}= | virtual
+| ${overhead}= | ${0}
*** Test Cases ***
-| tc01-eth2p-ethicmpv4-l2bdbase-device
+| tc01-eth2p-ethicmpv4-l2bdbase-dev
| | [Documentation]
-| | ... | [Top] TG-DUT1-TG. [Enc] Eth-IPv4-ICMPv4.
-| | ... | [Cfg] Configure L2 bridge-domain (L2BD) with MAC learning enabled on\
-| | ... | DUT1. Add both interfaces towards TG to this L2BD.
-| | ... | [Ver] Make TG send ICMPv4 Echo Req in both directions between two of\
-| | ... | its interfaces to be switched by DUT1; verify all packets are\
-| | ... | received.
+| | ... | [Ver] Make TG send ICMPv4 Echo Reqs in both directions between two\
+| | ... | of its interfaces to be switched by DUT to and from docker; verify\
+| | ... | all packets are received.
+| | ...
+| | Set Test Variable | ${frame_size} | ${42}
+| | Set Test Variable | ${rxq_count_int} | ${1}
| | ...
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Configure interfaces in path up
-| | And Create bridge domain | ${dut_node} | ${bd_id}
-| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${bd_id}
-| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${bd_id}
-| | When All Vpp Interfaces Ready Wait | ${nodes}
-| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2}
+| | Given Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP Enable Traces On All Duts | ${nodes}
+| | When Initialize L2 bridge domain in circular topology
+| | Then Send ICMPv4 bidirectionally and verify received packets
+| | ... | ${tg} | ${tg_if1} | ${tg_if2}
-| tc02-eth2p-ethicmpv6-l2bdbase-device
+| tc02-eth2p-ethicmpv6-l2bdbase-dev
| | [Documentation]
-| | ... | [Top] TG-DUT1-TG. [Enc] Eth-IPv6-ICMPv6.
-| | ... | [Cfg] Configure L2 bridge-domain (L2BD) with MAC learning enabled on\
-| | ... | DUT1. Add both interfaces towards TG to this L2BD.
-| | ... | [Ver] Make TG send ICMPv6 Echo Req in both directions between two of\
-| | ... | its interfaces to be switched by DUT1; verify all packets are\
-| | ... | received.
+| | ... | [Ver] Make TG send ICMPv6 Echo Reqs in both directions between two\
+| | ... | of its interfaces to be switched by DUT to and from docker; verify\
+| | ... | all packets are received.
+| | ...
+| | Set Test Variable | ${frame_size} | ${62}
+| | Set Test Variable | ${rxq_count_int} | ${1}
| | ...
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Configure interfaces in path up
-| | And Create bridge domain | ${dut_node} | ${bd_id}
-| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${bd_id}
-| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${bd_id}
-| | When All Vpp Interfaces Ready Wait | ${nodes}
+| | Given Add PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP Enable Traces On All Duts | ${nodes}
+| | When Initialize L2 bridge domain in circular topology
| | Then Send ICMPv6 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2}
+| | ... | ${tg} | ${tg_if1} | ${tg_if2}
Code Review / csit.git / blobdiff