vpp_device: Multiple NICs (suitegen)

[csit.git] / tests / vpp / device / stats / eth2p-avf-dot1qip4-l2bdbasemaclrn-stats-dev.robot

diff --git a/tests/vpp/device/stats/eth2p-avf-dot1qip4-l2bdbasemaclrn-stats-dev.robot b/tests/vpp/device/stats/eth2p-avf-dot1qip4-l2bdbasemaclrn-stats-dev.robot
deleted file mode 100644 (file)
index baeadea..0000000
--- a/tests/vpp/device/stats/eth2p-avf-dot1qip4-l2bdbasemaclrn-stats-dev.robot
+++ /dev/null
@@ -1,87 +0,0 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | DRV_AVF
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | avf-dot1qip4-l2bdbasemaclrn
-|
-| Suite Setup | Setup suite topology interfaces | scapy
-| Suite Teardown | Tear down suite
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace
-|
-| Test Template | Local Template
-|
-| Documentation | *IPv4 routing with IEEE 802.1Q test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. IEEE 802.1Q\
-| ... | tagging is applied on links between TG-DUT1.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | two static IPv4 /30 route entries. DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \
-| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
-| ... | and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q.
-
-*** Variables ***
-| @{plugins_to_enable}= | avf_plugin.so | perfmon_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | avf
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 1
-| ${overhead}= | ${4}
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Ver] Make TG send IPv4 packets in both directions between two\
-| | ... | of its interfaces to be switched by DUT to and from docker; verify\
-| | ... | all packets are received.
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize layer dot1q
-| | And Initialize L2 bridge domain
-| | # Do not fail here, we have a non-stats copy of this test elsewhere,
-| | # here we want to see stats after traffic, even if that test fails.
-| | Then Run Keyword And Ignore Error
-| | ... | Send IPv4 bidirectionally and verify received packets
-| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
-| | And Verify statistic commands
-
-*** Test Cases ***
-| 68B-avf-dot1qip4-l2bdbasemaclrn-stats-dev
-| | [Tags] | 68B
-| | frame_size=${68} | phy_cores=${0}