Remove leading tc[nn] from test names

[csit.git] / tests / vpp / device / vm_vhost / ip6 / eth2p-ethipv6-ip6base-eth-2vhost-1vm-dev.robot

diff --git a/tests/vpp/device/vm_vhost/ip6/eth2p-ethipv6-ip6base-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/ip6/eth2p-ethipv6-ip6base-eth-2vhost-1vm-dev.robot
index bb0fb87..6db832f 100644 (file)
--- a/tests/vpp/device/vm_vhost/ip6/eth2p-ethipv6-ip6base-eth-2vhost-1vm-dev.robot
+++ b/tests/vpp/device/vm_vhost/ip6/eth2p-ethipv6-ip6base-eth-2vhost-1vm-dev.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2020 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -13,18 +13,20 @@
 
 *** Settings ***
 | Resource | resources/libraries/robot/shared/default.robot
-| ...
+|
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
 | ... | NIC_Virtual | ETH | IP6FWD | BASE | VHOST | 1VM | DRV_VFIO_PCI
-| ...
-| Suite Setup | Setup suite single link | scapy
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethipv6-ip6base-eth-2vhost-1vm
+|
+| Suite Setup | Setup suite topology interfaces | scapy
 | Test Setup | Setup test
 | Test Teardown | Tear down test | packet_trace | vhost
-| ...
+|
 | Test Template | Local Template
-| ...
+|
 | Documentation | *IPv4 routing test cases with vhost user interface*
-| ...
+|
 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
 | ... | VM and single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing on both links.
@@ -42,6 +44,10 @@
 | ${crypto_type}= | ${None}
 | ${nic_name}= | virtual
 | ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
 | ${overhead}= | ${0}
 | ${nf_chains}= | ${1}
 | ${nf_nodes}= | ${1}
@@ -57,16 +63,16 @@
 | | ... | interfaces. Both interfaces are configured with IP addresses from \
 | | ... | the same network. The VM is running VPP IPv6 forwarding to pass \
 | | ... | packet from one vhost-user interface to the other one.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer
 | | ... | - phy_cores - Number of physical cores. Type: integer
 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
 | | Set Test Variable | \${frame_size}
-| | ...
+| |
 | | Given Set Max Rate And Jumbo
 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
 | | And Pre-initialize layer driver | ${nic_driver}
@@ -76,15 +82,15 @@
 | | And Initialize IPv6 forwarding with vhost in 2-node circular topology
 | | ... | nf_nodes=${nf_nodes}
 | | And Configure chains of NFs connected via vhost-user
-| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | vnf=vpp_chain_ip6
-| | ... | pinning=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes}
+| | ... | vnf=vppip6_2vhostvr1024 | pinning=${False}
 | | Then Send packet and verify headers
 | | ... | ${tg} | ${tg_if1_ip} | ${tg_if2_ip}
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
 
 
 *** Test Cases ***
-| tc01-64B-ethipv6-ip6base-eth-2vhost-1vm-dev
+| 64B-ethipv6-ip6base-eth-2vhost-1vm-dev
 | | [Tags] | 64B
 | | frame_size=${64} | phy_cores=${0}