--- /dev/null
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables***
+| ${interface}= | ${node['interfaces']['port1']['name']}
+
+*** Settings ***
+| Library | resources.libraries.python.Trace.Trace
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/lisp_gpe.robot
+| Variables | resources/test_data/honeycomb/lisp/lisp_gpe.py
+| ...
+| Documentation | *Honeycomb LISP GPE test suite.*
+| ...
+| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
+| ...
+| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
+| ...
+| Force Tags | HC_FUNC
+
+*** Test Cases ***
+| TC01: Honeycomb enables LISP GPE feature
+| | [Documentation] | Check if Honeycomb can enable the LISP GPE feature.
+| | ...
+| | [Tags] | HC_FUNC | test
+| | Given LISP GPE Should Not Be Configured | ${node}
+| | When Honeycomb enables LISP GPE | ${node}
+| | Then LISP GPE state from Honeycomb should be | ${node} | enabled
+| | And LISP GPE state from VAT should be | ${node} | enabled
+
+| TC02: Honeycomb disable LISP GPE feature
+| | [Documentation] | Check if Honeycomb can enable the LISP GPE feature.
+| | ...
+| | [Tags] | HC_FUNC
+| | [Teardown] | Honeycomb enables LISP GPE | ${node}
+| | Given LISP GPE state from Honeycomb should be | ${node} | enabled
+| | And LISP GPE state from VAT should be | ${node} | enabled
+| | When Honeycomb disables LISP GPE | ${node}
+| | Then LISP GPE state from Honeycomb should be | ${node} | disabled
+| | And LISP GPE state from VAT should be | ${node} | disabled
+
+| TC03: Honeycomb configures LISP GPE mapping - negative, IPv4
+| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
+| | ... | with VRF.
+| | ...
+| | [Tags] | HC_FUNC
+| | Given LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+| | When Honeycomb adds first LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4}
+| | Then LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${negative_mapping_ip4}
+
+| TC04: Honeycomb can remove LISP GPE mapping
+| | [Documentation] | Check if Honeycomb can remove a configured LISP GPE\
+| | ... | mapping.
+| | ...
+| | [Tags] | HC_FUNC
+| | Given LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${negative_mapping_ip4}
+| | When Honeycomb removes LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4['id']}
+| | Then LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+
+| TC05: Honeycomb configures LISP GPE mapping - positive, IPv4
+| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
+| | ... | with VRF.
+| | ...
+# | | [Tags] | HC_FUNC
+# Disabled due to VPP-915 - configuring positive entry crashes VPP
+| | [Teardown] | Honeycomb removes LISP GPE mapping
+| | ... | ${node} | ${positive_mapping_ip4['id']}
+| | Given LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+| | When Honeycomb adds first LISP GPE mapping
+| | ... | ${node} | ${positive_mapping_ip4}
+| | Then LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${positive_mapping_ip4}
+
+| TC06: Honeycomb configures LISP GPE mapping - negative, IPv6
+| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
+| | ... | with VRF.
+| | ...
+| | [Tags] | HC_FUNC
+| | [Teardown] | Honeycomb removes LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip6['id']}
+| | Given LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+| | When Honeycomb adds first LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip6}
+| | Then LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${negative_mapping_ip6}
+
+| TC07: Honeycomb configures LISP GPE mapping - positive, IPv6
+| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
+| | ... | with VRF.
+| | ...
+# | | [Tags] | HC_FUNC
+# Disabled due to VPP-915 - configuring positive entry crashes VPP
+| | [Teardown] | Honeycomb removes LISP GPE mapping
+| | ... | ${node} | ${positive_mapping_ip6['id']}
+| | Given LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+| | When Honeycomb adds first LISP GPE mapping
+| | ... | ${node} | ${positive_mapping_ip6}
+| | Then LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${positive_mapping_ip6}
+
+| TC08: Honeycomb can modify existing LISP GPE mappping
+| | [Documentation] | Check if Honeycomb can modify and existing LISP GPE\
+| | ... | mapping.
+| | ...
+| | [Tags] | HC_FUNC
+| | [Teardown] | Honeycomb removes LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4_edit['id']}
+| | Given LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+| | When Honeycomb adds first LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4}
+| | Then LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${negative_mapping_ip4}
+| | When Honeycomb adds first LISP GPE mapping | ${node}
+| | ... | ${negative_mapping_ip4_edit}
+| | Then LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${negative_mapping_ip4_edit}
+
+| TC09: Honeycomb can configure multiple LISP GPE mapppings
+| | [Documentation] | Check if Honeycomb can configure multiple LISP GPE\
+| | ... | mappings at the same time.
+| | ...
+| | [Tags] | HC_FUNC
+| | [Teardown] | Run Keywords
+| | ... | Honeycomb removes LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4['id']}
+| | ... | AND | Honeycomb removes LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4_2['id']}
+| | Given LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+| | When Honeycomb adds first LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4}
+| | And Honeycomb adds LISP GPE mapping | ${node} | ${negative_mapping_ip4_2}
+| | Then LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${negative_mapping_ip4}
+| | And LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${negative_mapping_ip4_2}
+
+| TC10: Honeycomb can disable all LISP GPE features
+| | [Documentation] | Check if Honeycomb can disable all LISP GPE features.
+| | ...
+| | [Tags] | HC_FUNC
+| | Given Honeycomb adds first LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4}
+| | When Honeycomb disables all LISP GPE features | ${node}
+| | Then LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+| | And LISP GPE state from Honeycomb should be | ${node} | disabled
+| | And LISP GPE state from VAT should be | ${node} | disabled
+
+| TC11: Honeycomb can configure LISP GPE for traffic test - IPv4
+| | [Documentation]
+| | ... | [Top] TG-DUT1-TG.
+| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4
+| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1.
+| | ... | [Ver] Case: ip4-lispgpe-ip4 - phy2lisp
+| | ... | Make TG send ICMPv4 Echo Req between its interfaces through DUT1\
+| | ... | LISP GPE tunnel verify LISP encapsulation of received packet.
+| | ... | [Ref] RFC6830.
+| | ...
+| | [Tags] | test
+| | [Teardown] | LISPGPE functional traffic test teardown
+| | Given Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip4} | ${prefix_len4}
+| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip4} | ${prefix_len4}
+| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${src_ip4} | ${tg_to_dut_if1_mac}
+| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${tg_to_dut_if2_ip4} | ${tg_to_dut_if2_mac}
+| | When Honeycomb enables LISP GPE | ${node}
+| | And Honeycomb adds LISP GPE mapping | ${node} | ${lisp_traffic_ip4}
+| | Then send packet and verify LISP GPE encap
+| | ... | ${tg_node} | ${src_ip4} | ${dst_ip4}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
+| | ... | ${src_rloc4} | ${dst_rloc4}
+
+| TC12: Honeycomb can configure LISP GPE for traffic test - IPv6
+| | [Documentation]
+| | ... | [Top] TG-DUT1-TG.
+| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6
+| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1.
+| | ... | [Ver] Case: ip6-lispgpe-ip6 - phy2lisp
+| | ... | Make TG send ICMPv6 Echo Req between its interfaces through DUT1\
+| | ... | LISP GPE tunnel verify LISP encapsulation of received packet.
+| | ... | [Ref] RFC6830.
+| | ...
+| | [Tags] | test
+| | [Teardown] | LISPGPE functional traffic test teardown
+| | Given Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets interface IPv6 address | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_len6}
+| | And Honeycomb sets interface IPv6 address | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_len6}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${src_ip6} | ${tg_to_dut_if1_mac}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${tg_to_dut_if2_ip6} | ${tg_to_dut_if2_mac}
+| | When Honeycomb enables LISP GPE | ${node}
+| | And Honeycomb adds LISP GPE mapping | ${node} | ${lisp_traffic_ip6}
+| | Then send packet and verify LISP GPE encap
+| | ... | ${tg_node} | ${src_ip6} | ${dst_ip6}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
+| | ... | ${src_rloc6} | ${dst_rloc6}
Code Review / csit.git / blobdiff