CSIT-687: Directory structure reorganization

[csit.git] / tests / vpp / func / ip4 / eth2p-dot1q-ip4base-func.robot

diff --git a/tests/vpp/func/ip4/eth2p-dot1q-ip4base-func.robot b/tests/vpp/func/ip4/eth2p-dot1q-ip4base-func.robot
new file mode 100644 (file)
index 0000000..f206fe3
--- /dev/null
+++ b/tests/vpp/func/ip4/eth2p-dot1q-ip4base-func.robot
@@ -0,0 +1,107 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/ip/ip4.robot
+| Resource | resources/libraries/robot/l2/tagging.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| Library  | resources.libraries.python.Trace
+| Library | resources.libraries.python.IPv6Util
+| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | VM_ENV | HW_ENV | VPP_VM_ENV
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *IPv4 with VLAN subinterfaces*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| ... | with double links between nodes.
+| ... | *[Enc] Packet encapsulations:* Eth-IPv4-ICMPv4 on TG-DUT1-IF1,
+| ... | Eth-dot1q-IPv4-ICMPv4 on TG-DUT1-IF2.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with 2 Vlan subinterfaces
+| ... | on DUT1-IF2. The subinterfaces and DUT1-IF1 have IP addresses set and
+| ... | corresponding IP neighbor entries are configured.
+| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q.
+
+*** Variables ***
+
+| ${ip4_net0_1}= | 192.168.0.1
+| ${ip4_net0_2}= | 192.168.0.2
+| ${ip4_net1_1}= | 192.168.100.1
+| ${ip4_net1_2}= | 192.168.100.2
+| ${ip4_net2_1}= | 192.168.200.1
+| ${ip4_net2_2}= | 192.168.200.2
+| ${ip4_prefix}= | 24
+| ${tag_1}= | ${10}
+| ${tag_2}= | ${20}
+
+*** Test Cases ***
+| TC01: Process untagged send tagged
+| | Given Vlan Test Setup
+| | Then Send packet and verify headers
+| | ... | ${tg_node} | ${ip4_net0_2} | ${ip4_net2_2} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} | ${tg_to_dut_if2}
+| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
+| | ... | encaps_rx=Dot1q | vlan_rx=${tag_2}
+
+| TC02: Process tagged send untagged
+# It doesn't work with virtio
+| | [Tags] | EXPECTED_FAILING
+| | Given Vlan Test Setup
+| | Then Send packet and verify headers
+| | ... | ${tg_node} | ${ip4_net2_2} | ${ip4_net0_2} | ${tg_to_dut_if2}
+| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if1}
+| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if1_mac}
+| | ... | encaps_tx=Dot1q | vlan_tx=${tag_2}
+
+| TC03: Process tagged send tagged
+# It doesn't work with virtio
+| | [Tags] | EXPECTED_FAILING
+| | Given Vlan Test Setup
+| | Then Send packet and verify headers
+| | ... | ${tg_node} | ${ip4_net1_2} | ${ip4_net2_2} | ${tg_to_dut_if2}
+| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2}
+| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
+| | ... | encaps_tx=Dot1q | vlan_tx=${tag_1}
+| | ... | encaps_rx=Dot1q | vlan_rx=${tag_2}
+| | And Send packet and verify headers
+| | ... | ${tg_node} | ${ip4_net2_2} | ${ip4_net1_2} | ${tg_to_dut_if2}
+| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2}
+| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
+| | ... | encaps_tx=Dot1q | vlan_tx=${tag_2}
+| | ... | encaps_rx=Dot1q | vlan_rx=${tag_1}
+
+*** Keywords ***
+| Vlan Test Setup
+| | Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | Set interfaces in 2-node circular topology up
+| |
+| | ${vlan1_name} | ${vlan1_index}= | Create vlan sub-interface
+| | ... | ${dut_node} | ${dut_to_tg_if2} | ${tag_1}
+| | ${vlan2_name} | ${vlan2_index}= | Create vlan sub-interface
+| | ... | ${dut_node} | ${dut_to_tg_if2} | ${tag_2}
+| |
+| | Set Interface Address | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${ip4_net0_1} | ${ip4_prefix}
+| | Set Interface Address | ${dut_node}
+| | ... | ${vlan1_index} | ${ip4_net1_1} | ${ip4_prefix}
+| | Set Interface Address | ${dut_node}
+| | ... | ${vlan2_index} | ${ip4_net2_1} | ${ip4_prefix}
+| |
+| | Add IP Neighbor | ${dut_node} | ${dut_to_tg_if1} | ${ip4_net0_2}
+| | ... | ${tg_to_dut_if1_mac}
+| | Add IP Neighbor | ${dut_node} | ${vlan1_index} | ${ip4_net1_2}
+| | ... | ${tg_to_dut_if2_mac}
+| | Add IP Neighbor | ${dut_node} | ${vlan2_index} | ${ip4_net2_2}
+| | ... | ${tg_to_dut_if2_mac}