CSIT-687: Directory structure reorganization

[csit.git] / tests / vpp / func / ip4_tunnels / vxlan / eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot

diff --git a/tests/vpp/func/ip4_tunnels/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot b/tests/vpp/func/ip4_tunnels/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot
new file mode 100644 (file)
index 0000000..e4c8c25
--- /dev/null
+++ b/tests/vpp/func/ip4_tunnels/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot
@@ -0,0 +1,74 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/overlay/vxlan.robot
+| Resource | resources/libraries/robot/l2/l2_traffic.robot
+| Library  | resources.libraries.python.Trace
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *RFC7348 VXLAN: Bridge-domain with VXLAN over VLAN test cases*
+| ...
+| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology with
+| ... | single links between nodes.
+| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-VXLAN-Eth-IPv4-ICMPv4 on
+| ... | DUT1-DUT2, Eth-dot1q-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
+| ... | bridge-domain (L2BD) switching combined with static MACs, MAC learning
+| ... | enabled and Split Horizon Groups (SHG) depending on test case; VXLAN
+| ... | tunnels are configured between L2BDs on DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are
+| ... | sent in both directions by TG on links to DUT1 and DUT2; on receive TG
+| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr and
+| ... | MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC7348.
+
+*** Variables ***
+| ${VNI}= | 23
+| ${BID}= | 23
+| ${VLAN}= | 10
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4oVLAN tunnels switch ICMPv4 between TG links
+| | [Tags] | EXPECTED_FAILING
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-VXLAN-Eth-IPv4-ICMPv4 on\
+| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
+| | ... | configure L2 bridge-domain (MAC learning enabled), each with one
+| | ... | interface to TG and one VXLAN tunnel interface towards the other DUT
+| | ... | over VLAN sub-interface. [Ver] Make TG send ICMPv4 Echo Req between
+| | ... | two of its interfaces, verify all packets are received. [Ref] RFC7348.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Create vlan interfaces for VXLAN | ${VLAN}
+| | ... | ${dut1_node} | ${dut1_to_dut2}
+| | ... | ${dut2_node} | ${dut2_to_dut1}
+| | And Configure IP addresses and neighbors on interfaces
+| | ... | ${dut1_node} | ${dut1s_vlan_name} | ${dut1s_vlan_index}
+| | ... | ${dut2_node} | ${dut2s_vlan_name} | ${dut2s_vlan_index}
+| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${VNI}
+| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address}
+| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan} | up
+| | And Add interfaces to L2BD | ${dut1_node} | ${BID}
+| | ... | ${dut1_to_tg} | ${dut1s_vxlan}
+| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${VNI}
+| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address}
+| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan} | up
+| | And Add interfaces to L2BD | ${dut2_node} | ${BID}
+| | ... | ${dut2_to_tg} | ${dut2s_vxlan}
+| | Then Send ICMPv4 bidirectionally and verify received packets
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}