| ... | Set up 3-node performance topology with DUT's NIC model | L2
| ... | Intel-X710
| ... | AND | Set up performance test suite with MEMIF
-| ... | AND | Set up performance topology with containers
| ...
-| Suite Teardown | Tear down 3-node performance topology with container
+| Suite Teardown | Tear down 3-node performance topology
| ...
-| Test Setup | Run Keywords
-| ... | Set up performance test
-| ... | AND | Restart VPP in all 'VNF' containers
+| Test Setup | Set up performance test
| ...
-| Test Teardown | Tear down performance mrr test
+| Test Teardown | Run Keywords
+| ... | Tear down performance mrr test
+| ... | AND | Tear down performance test with container
| ...
-| Documentation | *Raw results L2XC test cases*
+| Test Template | Local Template
+| ...
+| Documentation | *Raw results L2XC test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | with single links between nodes.
| ${s_limit}= | ${10000000000}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
-# LXC container
-| ${container_count}= | ${1}
+# Container
| ${container_engine}= | LXC
-| ${container_image}= | ${EMPTY}
-| ${container_install_dkms}= | ${FALSE}
| ${container_chain_topology}= | chain
-# CPU settings
-| ${system_cpus}= | ${1}
-| ${vpp_cpus}= | ${5}
-| ${container_cpus}= | ${5}
*** Keywords ***
-| Check RR for l2xcbase-eth-2memif-1lxc
+| Local Template
| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\
-| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | [Cfg] DUT runs L2XC switching config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
| | ... | trial throughput test.
| | ...
-| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ... | *Arguments:*
+| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
| | ...
-| | # Test Variables required for test teardown
-| | Set Test Variable | ${framesize}
-| | ${get_framesize}= | Get Frame Size | ${framesize}
-| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
| | ...
-| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Run Keyword If | ${get_framesize} < ${1522}
-| | ... | Add no multi seg to all DUTs
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
+| | ... | ${s_limit} | ${framesize}
| | And Apply startup configuration on all VPP DUTs
-| | And Initialize L2 xconnect for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | And Set up performance test with containers
+| | And Initialize L2 xconnect with memif pairs
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
-| tc01-64B-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
-| | ... | throughput test.
-| | ...
-| | [Tags] | 64B | 1T1C | STHREAD
-| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
-| | framesize=${64} | wt=1 | rxq=1
+| tc01-64B-1c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Tags] | 64B | 1C
+| | framesize=${64} | phy_cores=${1}
-| tc02-1518B-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
-| | ... | throughput test.
-| | ...
-| | [Tags] | 1518B | 1T1C | STHREAD
-| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
-| | framesize=${1518} | wt=1 | rxq=1
+| tc02-64B-2c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Tags] | 64B | 2C
+| | framesize=${64} | phy_cores=${2}
-| tc03-9000B-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
-| | ... | throughput test.
-| | ...
-| | [Tags] | 9000B | 1T1C | STHREAD
-| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
-| | framesize=${9000} | wt=1 | rxq=1
+| tc03-64B-4c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Tags] | 64B | 4C
+| | framesize=${64} | phy_cores=${4}
-| tc04-IMIX-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
-| | ... | throughput test.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 1T1C | STHREAD
-| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
-| | framesize=IMIX_v4_1 | wt=1 | rxq=1
+| tc04-1518B-1c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Tags] | 1518B | 1C
+| | framesize=${1518} | phy_cores=${1}
-| tc05-64B-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
-| | ... | throughput test.
-| | ...
-| | [Tags] | 64B | 2T2C | MTHREAD
-| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
-| | framesize=${64} | wt=2 | rxq=1
+| tc05-1518B-2c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Tags] | 1518B | 2C
+| | framesize=${1518} | phy_cores=${2}
-| tc06-1518B-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
-| | ... | throughput test.
-| | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD
-| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
-| | framesize=${1518} | wt=2 | rxq=1
+| tc06-1518B-4c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Tags] | 1518B | 4C
+| | framesize=${1518} | phy_cores=${4}
-| tc07-9000B-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
-| | ... | throughput test.
-| | ...
-| | [Tags] | 9000B | 2T2C | MTHREAD
-| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
-| | framesize=${9000} | wt=2 | rxq=1
+| tc07-9000B-1c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Tags] | 9000B | 1C
+| | framesize=${9000} | phy_cores=${1}
-| tc08-IMIX-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
-| | ... | throughput test.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD
-| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
-| | framesize=IMIX_v4_1 | wt=2 | rxq=1
+| tc08-9000B-2c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Tags] | 9000B | 2C
+| | framesize=${9000} | phy_cores=${2}
-| tc09-64B-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\
-| | ... | 2 receive queues per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
-| | ... | throughput test.
-| | ...
-| | [Tags] | 64B | 4T4C | MTHREAD
-| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
-| | framesize=${64} | wt=4 | rxq=2
+| tc09-9000B-4c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Tags] | 9000B | 4C
+| | framesize=${9000} | phy_cores=${4}
-| tc10-1518B-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\
-| | ... | 2 receive queues per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
-| | ... | throughput test.
-| | ...
-| | [Tags] | 1518B | 4T4C | MTHREAD
-| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
-| | framesize=${1518} | wt=4 | rxq=2
+| tc10-IMIX-1c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Tags] | IMIX | 1C
+| | framesize=IMIX_v4_1 | phy_cores=${1}
-| tc11-9000B-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\
-| | ... | 2 receive queues per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
-| | ... | throughput test.
-| | ...
-| | [Tags] | 9000B | 4T4C | MTHREAD
-| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
-| | framesize=${9000} | wt=4 | rxq=2
+| tc11-IMIX-2c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Tags] | IMIX | 2C
+| | framesize=IMIX_v4_1 | phy_cores=${2}
-| tc12-IMIX-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\
-| | ... | 2 receive queues per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
-| | ... | throughput test.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 4T4C | MTHREAD
-| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc
-| | framesize=IMIX_v4_1 | wt=4 | rxq=2
+| tc12-IMIX-4c-eth-l2xcbase-eth-2memif-1lxc-mrr
+| | [Tags] | IMIX | 4C
+| | framesize=IMIX_v4_1 | phy_cores=${4}
Code Review / csit.git / blobdiff