-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1tnlhw-ip4base-policy-aes256gcm
|
-| Suite Setup | Setup suite single link | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | ipsechw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance
+| Test Teardown | Tear down test | performance | ipsec_all
|
| Test Template | Local Template
|
-| Documentation | *IPv4 IPsec tunnel mode performance test suite.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| Documentation | **IPv4 IPsec tunnel mode performance test suite.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-IPSec on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | encrypt it and send to another DUT, where packets are decrypted and \
+| ... | sent back to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of IPSec tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
| ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ... | crypto_native_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${osi_layer}= | L3
| ${overhead}= | ${54}
-| ${tg_if1_ip4}= | 192.168.10.2
-| ${dut1_if1_ip4}= | 192.168.10.1
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.1
-| ${dut2_if1_ip4}= | 100.0.0.2
-| ${dut2_if2_ip4}= | 192.168.20.1
-| ${tg_if2_ip4}= | 192.168.20.2
+| ${dut2_if1_ip4}= | 200.0.0.102
+| ${dut2_if2_ip4}= | 192.168.20.11
+| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_tunnels}= | ${1}
# Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}
*** Keywords ***
| Local Template
| | [Documentation]
-| | ... | [Cfg] DUTs runs IPsec tunneling AES_256_GCM config.\
+| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
| |
| | ... | *Arguments:*
| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
-| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
+| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels}
| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4}
| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| tc01-64B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
+| 64B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
| | [Tags] | 64B | 1C
| | frame_size=${64} | phy_cores=${1}
-| tc02-64B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
+| 64B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
| | [Tags] | 64B | 2C
| | frame_size=${64} | phy_cores=${2}
-| tc03-64B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
+| 64B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
| | [Tags] | 64B | 4C
| | frame_size=${64} | phy_cores=${4}
-| tc04-1518B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
+| 1518B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| tc05-1518B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
+| 1518B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| tc06-1518B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
+| 1518B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| tc10-IMIX-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
+| 9000B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| tc11-IMIX-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
+| IMIX-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| tc12-IMIX-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
+| IMIX-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}
Code Review / csit.git / blobdiff