| Suite Teardown | Tear down 3-node performance topology
| ...
| Test Setup | Set up performance test
+| ...
| Test Teardown | Tear down performance mrr test
| ...
+| Test Template | Local Template
+| ...
| Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${32}
-| ${ipsec_overhead}= | ${54}
+| ${overhead}= | ${54}
| ${n_tunnels}= | ${1000}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}
*** Keywords ***
-| Check RR for IPv4 routing with IPSec HW cryptodev
+| Local Template
| | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config with ${wt} thread(s),\
-| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
| | ... | trial throughput test.
| | ...
-| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ... | *Arguments:*
+| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
| | ...
-| | # Test Variables required for test teardown
-| | Set Test Variable | ${framesize}
-| | ${get_framesize}= | Get Frame Size | ${framesize}
-| | ${max_rate}= | Calculate pps | ${s_24.5G}
-| | ... | ${get_framesize} + ${ipsec_overhead}
-| | ${max_rate}= | Set Variable If
-| | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate}
-| | ${encr_alg}= | Crypto Alg AES GCM 128
-| | ${auth_alg}= | Integ Alg AES GCM 128
+| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
| | ...
-| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Run Keyword If | ${get_framesize} < ${1522}
-| | ... | Add no multi seg to all DUTs
-| | And Add cryptodev to all DUTs | ${${wt}}
+| | ${encr_alg} = | Crypto Alg AES GCM 128
+| | ${auth_alg} = | Integ Alg AES GCM 128
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
+| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead}
+| | ... | pps_limit=${s_18.75Mpps}
+| | And Add cryptodev to all DUTs | ${phy_cores}
| | And Add DPDK dev default RXD to all DUTs | 2048
| | And Add DPDK dev default TXD to all DUTs | 2048
| | And Apply startup configuration on all VPP DUTs
| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | And Set interfaces in path in 3-node circular topology up
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
-| tc01-64B-1t1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
-| | [Documentation]
-| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\
-| | ... | configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
-| | ... | throughput test.
-| | [Tags] | 64B | 1T1C | STHREAD
-| | ...
-| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev
-| | framesize=${64} | wt=1 | rxq=1
+| tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
+| | [Tags] | 64B | 1C
+| | framesize=${64} | phy_cores=${1}
-| tc02-1518B-1t1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
-| | [Documentation]
-| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\
-| | ... | configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
-| | ... | trial throughput test.
-| | [Tags] | 1518B | 1T1C | STHREAD
-| | ...
-| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev
-| | framesize=${1518} | wt=1 | rxq=1
+| tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
+| | [Tags] | 64B | 2C
+| | framesize=${64} | phy_cores=${2}
-# TODO: Add check to make test fail if rx=0.
-# TODO: Add 9000B test cases when they start passing.
+| tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
+| | [Tags] | 64B | 4C
+| | framesize=${64} | phy_cores=${4}
-| tc04-IMIX-1t1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
-| | [Documentation]
-| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\
-| | ... | configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\
-| | ... | trial throughput test.
-| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
-| | [Tags] | IMIX | 1T1C | STHREAD
-| | ...
-| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev
-| | framesize=IMIX_v4_1 | wt=1 | rxq=1
+| tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
+| | [Tags] | 1518B | 1C
+| | framesize=${1518} | phy_cores=${1}
-| tc05-64B-2t2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
-| | [Documentation]
-| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\
-| | ... | configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
-| | ... | throughput test.
-| | [Tags] | 64B | 2T2C | MTHREAD
-| | ...
-| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev
-| | framesize=${64} | wt=2 | rxq=1
+| tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
+| | [Tags] | 1518B | 2C
+| | framesize=${1518} | phy_cores=${2}
-| tc06-1518B-2t2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
-| | [Documentation]
-| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\
-| | ... | configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
-| | ... | trial throughput test.
-| | [Tags] | 1518B | 2T2C | MTHREAD
-| | ...
-| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev
-| | framesize=${1518} | wt=2 | rxq=1
+| tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
+| | [Tags] | 1518B | 4C
+| | framesize=${1518} | phy_cores=${4}
-| tc08-IMIX-2t2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
-| | [Documentation]
-| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\
-| | ... | configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\
-| | ... | trial throughput test.
-| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
-| | [Tags] | IMIX | 2T2C | MTHREAD
-| | ...
-| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev
-| | framesize=IMIX_v4_1 | wt=2 | rxq=1
+| tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
+| | [Tags] | 9000B | 1C
+| | framesize=${9000} | phy_cores=${1}
-| tc09-64B-4t4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
-| | [Documentation]
-| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\
-| | ... | configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
-| | ... | throughput test.
-| | [Tags] | 64B | 4T4C | MTHREAD
-| | ...
-| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev
-| | framesize=${64} | wt=4 | rxq=2
+| tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
+| | [Tags] | 9000B | 2C
+| | framesize=${9000} | phy_cores=${2}
-| tc10-1518B-4t4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
-| | [Documentation]
-| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\
-| | ... | configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
-| | ... | trial throughput test.
-| | [Tags] | 1518B | 4T4C | MTHREAD
-| | ...
-| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev
-| | framesize=${1518} | wt=4 | rxq=2
+| tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
+| | [Tags] | 9000B | 4C
+| | framesize=${9000} | phy_cores=${4}
-| tc12-IMIX-4t4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
-| | [Documentation]
-| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\
-| | ... | configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
-| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\
-| | ... | trial throughput test.
-| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
-| | [Tags] | IMIX | 4T4C | MTHREAD
-| | ...
-| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev
-| | framesize=IMIX_v4_1 | wt=4 | rxq=2
+| tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
+| | [Tags] | IMIX | 1C
+| | framesize=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
+| | [Tags] | IMIX | 2C
+| | framesize=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr
+| | [Tags] | IMIX | 4C
+| | framesize=IMIX_v4_1 | phy_cores=${4}
Code Review / csit.git / blobdiff