FIX: Naming convention compliance

[csit.git] / tests / vpp / perf / gso / 2n1l-10ge2p1x710-ethip4-ip4base-2tap-iperf3.robot

diff --git a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-iperf3.robot b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-iperf3.robot
deleted file mode 100644 (file)
index af05129..0000000
--- a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2tap-iperf3.robot
+++ /dev/null
@@ -1,112 +0,0 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
-| ... | NIC_Intel-X710 | IP4FWD | BASE | IP4BASE | DRV_TAP
-| ... | RXQ_SIZE_4096 | TXQ_SIZE_4096 | GSO_FALSE
-| ... | ethip4-ip4base-2tap
-|
-| Suite Setup | Setup suite topology interfaces
-| Suite Teardown | Tear down suite
-| Test Setup | Setup test
-| Test Teardown | Tear down test | iPerf3 | namespace
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases with TAPv2*
-|
-| ... | *[Top] Network Topologies:* DUT1 1-node topology without physical links.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.
-| ... | *[Ver] TG verification:* iPerf3 client/server is used for Packet\
-| ... | generation and verification.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | ping_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | tap
-| ${nic_rxq_size}= | 4096
-| ${nic_txq_size}= | 4096
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L7
-| ${overhead}= | ${0}
-| ${enable_gso}= | ${False}
-# iPerf3 client settings:
-| ${iperf_client_bind}= | 1.1.1.1
-| ${iperf_client_bind_gw}= | 1.1.1.2
-| ${iperf_client_bind_mask}= | 30
-| ${iperf_client_interface}= | tap0
-| ${iperf_client_namespace}= | tap0_namespace
-| ${iperf_client_udp}= | ${False}
-| ${iperf_client_node}= | DUT1
-| ${iperf_client_affinity} | ${None}
-# iPerf3 server settings:
-| ${iperf_server_bind}= | 2.2.2.2
-| ${iperf_server_bind_gw}= | 2.2.2.1
-| ${iperf_server_bind_mask}= | 30
-| ${iperf_server_interface}= | tap1
-| ${iperf_server_namespace}= | tap1_namespace
-| ${iperf_server_node}= | DUT1
-| ${iperf_server_pf_key}= | ${None}
-# Trial data overwrite:
-| ${trial_duration}= | ${30}
-| ${trial_multiplicity}= | ${10}
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT configuration: DUT1 is configured with IPv4 routing.
-| | ... | [Ver] Measure MaxReceivedRate for ${frame_size}B frames\
-| | ... | using burst trials throughput test.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| | Set Test Variable | \${rxq_ratio} | ${1}
-| |
-| | Given Set Jumbo
-| | And Add worker threads for GSO tests to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${DUT1_${int}1}[0] | 1.1.1.2 | 30
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${DUT1_${int}2}[0] | 2.2.2.1 | 30
-| | Set Test Variable | ${iperf_server_pf_key} | ${DUT1_pf1}[0]
-| | Then Traffic should pass with maximum rate on iPerf3
-
-*** Test Cases ***
-| 128KB-1c-ethip4-ip4base-2tap-iperf3
-| | [Tags] | 128KB | 1C
-| | frame_size=${128000} | phy_cores=${1}
-
-| 128KB-2c-ethip4-ip4base-2tap-iperf3
-| | [Tags] | 128KB | 2C
-| | frame_size=${128000} | phy_cores=${2}
-
-| 128KB-4c-ethip4-ip4base-2tap-iperf3
-| | [Tags] | 128KB | 4C
-| | frame_size=${128000} | phy_cores=${4}