*** Settings ***
| Resource | resources/libraries/robot/performance/performance_setup.robot
| Library | resources.libraries.python.Cop
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
-| ... | WITH NAME | dut1_v4
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
-| ... | WITH NAME | dut2_v4
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | COPWHLIST
# Traffic profile:
| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
-*** Test Cases ***
-| tc01-64B-1t1c-ethip4-ip4base-copwhtlistbase-ndrchk
+*** Keywords ***
+| Check NDR for ethip4-ip4base-copwhtlistbase
| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
-| | ... | ref-NDR for 64 Byte frames using single trial throughput test
-| | ... | at 2x 4.0mpps.
-| | [Tags] | 64B | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 4.0mpps
-| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Verify ref-NDR for ${framesize} frames using single trial\
+| | ... | throughput test at 2x ${rate}.
+| | ...
+| | [Arguments] | ${framesize} | ${rate} | ${wt} | ${rxq}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | Set Test Variable | ${rate}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add no multi seg to all DUTs
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
+| | And Initialize IPv4 forwarding in 3-node circular topology
| | And Add Fib Table | ${dut1} | 1
| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
| | And Add Fib Table | ${dut2} | 1
| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | Then Traffic should pass with no loss | ${perf_trial_duration}
+| | ... | ${rate} | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4-ip4base-copwhtlistbase-ndrchk
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 64 Byte frames using single trial throughput test
+| | ... | at 2x 4.0mpps.
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase
+| | framesize=${64} | rate=4.0mpps | wt=1 | rxq=1
| tc02-1518B-1t1c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | ref-NDR for 1518 Byte frames using single trial throughput test
| | ... | at 2x 812743pps.
| | [Tags] | 1518B | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | ${1518}
-| | ${rate}= | Set Variable | 812743pps
-| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add no multi seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add Fib Table | ${dut1} | 1
-| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
-| | And Add Fib Table | ${dut2} | 1
-| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase
+| | framesize=${1518} | rate=812743pps | wt=1 | rxq=1
| tc03-9000B-1t1c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | ref-NDR for 9000 Byte frames using single trial throughput test
| | ... | at 2x 138580pps.
| | [Tags] | 9000B | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | ${9000}
-| | ${rate}= | Set Variable | 138580pps
-| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add Fib Table | ${dut1} | 1
-| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
-| | And Add Fib Table | ${dut2} | 1
-| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase
+| | framesize=${9000} | rate=138580pps | wt=1 | rxq=1
| tc04-64B-2t2c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | ref-NDR for 64 Byte frames using single trial throughput test
| | ... | at 2x 7.2mpps.
| | [Tags] | 64B | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 7.2mpps
-| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add no multi seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add Fib Table | ${dut1} | 1
-| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
-| | And Add Fib Table | ${dut2} | 1
-| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase
+| | framesize=${64} | rate=7.2mpps | wt=2 | rxq=1
| tc05-1518B-2t2c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | ref-NDR for 1518 Byte frames using single trial throughput test
| | ... | at 2x 812743pps.
| | [Tags] | 1518B | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | ${1518}
-| | ${rate}= | Set Variable | 812743pps
-| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add no multi seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add Fib Table | ${dut1} | 1
-| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
-| | And Add Fib Table | ${dut2} | 1
-| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase
+| | framesize=${1518} | rate=812743pps | wt=2 | rxq=1
| tc06-9000B-2t2c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | ref-NDR for 9000 Byte frames using single trial throughput test
| | ... | at 2x 138580pps.
| | [Tags] | 9000B | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | ${9000}
-| | ${rate}= | Set Variable | 138580pps
-| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add Fib Table | ${dut1} | 1
-| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
-| | And Add Fib Table | ${dut2} | 1
-| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase
+| | framesize=${9000} | rate=138580pps | wt=2 | rxq=1
| tc07-64B-4t4c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | ref-NDR for 64 Byte frames using single trial throughput test
| | ... | at 2x 10.4mpps.
| | [Tags] | 64B | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 10.4mpps
-| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add no multi seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add Fib Table | ${dut1} | 1
-| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
-| | And Add Fib Table | ${dut2} | 1
-| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase
+| | framesize=${64} | rate=10.4mpps | wt=4 | rxq=2
| tc08-1518B-4t4c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | ref-NDR for 1518 Byte frames using single trial throughput test
| | ... | at 2x 812743pps.
| | [Tags] | 1518B | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | ${1518}
-| | ${rate}= | Set Variable | 812743pps
-| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add no multi seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add Fib Table | ${dut1} | 1
-| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
-| | And Add Fib Table | ${dut2} | 1
-| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase
+| | framesize=${1518} | rate=812743pps | wt=4 | rxq=2
| tc09-9000B-4t4c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | ref-NDR for 9000 Byte frames using single trial throughput test
| | ... | at 2x 138580pps.
| | [Tags] | 9000B | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | ${9000}
-| | ${rate}= | Set Variable | 138580pps
-| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add Fib Table | ${dut1} | 1
-| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
-| | And Add Fib Table | ${dut2} | 1
-| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase
+| | framesize=${9000} | rate=138580pps | wt=4 | rxq=2
Code Review / csit.git / blobdiff