-# Copyright (c) 2018 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | NIC_Intel-X710 | IP4FWD | FEATURE | POLICE_MARK
| ...
| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | Intel-X710
+| ... | L3 | ${nic_name}
| Suite Teardown | Tear down 3-node performance topology
| ...
| Test Setup | Set up performance test
-| ...
-| Test Teardown | Tear down performance discovery test | ${min_rate}pps
-| ... | ${framesize} | ${traffic_profile}
+| Test Teardown | Tear down performance test
| ...
| Test Template | Local Template
| ...
| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
| ... | routing and two static IPv4 /24 route entries and policer with 2R3C
| ... | color-aware configuration. Policer is applied on links TG - DUT1 and
-| ... | DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
-| ... | of packets transmitted. NDR and PDR are discovered for different
-| ... | Ethernet L2 frame sizes using MLRsearch library.
+| ... | DUT2 - TG. DUT1 and DUT2 tested with ${nic_name}.\
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
| ... | flow-group) with all packets containing Ethernet header, IPv6 header
| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698.
*** Variables ***
-# X710 bandwidth limit
-| ${s_limit}= | ${10000000000}
+| ${nic_name}= | Intel-X710
+| ${overhead}= | ${0}
| ${cir}= | ${100}
| ${eir}= | ${150}
# Traffic profile:
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
| | ...
| | ... | *Arguments:*
-| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
| | ...
-| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
| | ...
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate} | ${10000}
-| | Set Test Variable | ${cb} | ${framesize}
-| | Set Test Variable | ${eb} | ${framesize}
+| | Set Test Variable | \${frame_size}
+| | Set Test Variable | \${cb} | ${frame_size}
+| | Set Test Variable | \${eb} | ${frame_size}
| | ...
| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
| | And Add PCI devices to all DUTs
-| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
-| | ... | ${s_limit} | ${framesize}
+| | Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv4 forwarding in circular topology
| | And Initialize IPv4 policer 2r3c-'ca' in circular topology
| | Then Find NDR and PDR intervals using optimized search
-| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
*** Test Cases ***
| tc01-64B-1c-ethip4-ip4base-ipolicemarkbase-ndrpdr
| | [Tags] | 64B | 1C
-| | framesize=${64} | phy_cores=${1}
+| | frame_size=${64} | phy_cores=${1}
| tc02-64B-2c-ethip4-ip4base-ipolicemarkbase-ndrpdr
| | [Tags] | 64B | 2C
-| | framesize=${64} | phy_cores=${2}
+| | frame_size=${64} | phy_cores=${2}
| tc03-64B-4c-ethip4-ip4base-ipolicemarkbase-ndrpdr
| | [Tags] | 64B | 4C
-| | framesize=${64} | phy_cores=${4}
+| | frame_size=${64} | phy_cores=${4}
| tc04-1518B-1c-ethip4-ip4base-ipolicemarkbase-ndrpdr
| | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
+| | frame_size=${1518} | phy_cores=${1}
| tc05-1518B-2c-ethip4-ip4base-ipolicemarkbase-ndrpdr
| | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
+| | frame_size=${1518} | phy_cores=${2}
| tc06-1518B-4c-ethip4-ip4base-ipolicemarkbase-ndrpdr
| | [Tags] | 1518B | 4C
-| | framesize=${1518} | phy_cores=${4}
+| | frame_size=${1518} | phy_cores=${4}
| tc07-9000B-1c-ethip4-ip4base-ipolicemarkbase-ndrpdr
| | [Tags] | 9000B | 1C
-| | framesize=${9000} | phy_cores=${1}
+| | frame_size=${9000} | phy_cores=${1}
| tc08-9000B-2c-ethip4-ip4base-ipolicemarkbase-ndrpdr
| | [Tags] | 9000B | 2C
-| | framesize=${9000} | phy_cores=${2}
+| | frame_size=${9000} | phy_cores=${2}
| tc09-9000B-4c-ethip4-ip4base-ipolicemarkbase-ndrpdr
| | [Tags] | 9000B | 4C
-| | framesize=${9000} | phy_cores=${4}
+| | frame_size=${9000} | phy_cores=${4}
| tc10-IMIX-1c-ethip4-ip4base-ipolicemarkbase-ndrpdr
| | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
| tc11-IMIX-2c-ethip4-ip4base-ipolicemarkbase-ndrpdr
| | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
| tc12-IMIX-4c-ethip4-ip4base-ipolicemarkbase-ndrpdr
| | [Tags] | IMIX | 4C
-| | framesize=IMIX_v4_1 | phy_cores=${4}
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
Code Review / csit.git / blobdiff