Python3: resources and libraries

[csit.git] / tests / vpp / perf / ip4 / 10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot
index 642c802..2561492 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot
@@ -13,20 +13,20 @@
 
 *** Settings ***
 | Resource | resources/libraries/robot/shared/default.robot
-| ...
+|
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL1 | 100_FLOWS
-| ...
+| ... | IACL | ACL1 | 100_FLOWS | DRV_VFIO_PCI
+|
 | Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
 | Test Setup | Setup test
 | Test Teardown | Tear down test | performance | acl
-| ...
+|
 | Test Template | Local Template
-| ...
+|
 | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-| ...
+|
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
 | ... | with single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
@@ -48,14 +48,17 @@
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
 | ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
 | ${overhead}= | ${0}
 # ACL test setup
 | ${acl_action}= | permit+reflect
 | ${acl_apply_type}= | input
 | ${no_hit_aces_number}= | 1
 | ${flows_per_dir}= | 100
+| ${ip_nr}= | ${10}
 # starting points for non-hitting ACLs
 | ${src_ip_start}= | 30.30.30.1
 | ${dst_ip_start}= | 40.40.40.1
@@ -65,31 +68,34 @@
 | ${port_step}= | ${1}
 | ${trex_stream1_subnet}= | 10.10.10.0/24
 | ${trex_stream2_subnet}= | 20.20.20.0/24
+# Traffic profile:
 | ${traffic_profile}= | trex-sl-3n-ethip4udp-10u10p-conc
 
 *** Keywords ***
 | Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config.
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
 | | ... | Type: integer, string
 | | ... | - phy_cores - Number of physical cores. Type: integer
 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
 | | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***