-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2020 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
# limitations under the License.
*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
+| Resource | resources/libraries/robot/shared/default.robot
+|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL1 | 100_FLOWS
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 3-node performance topology with DUT's NIC model | L3
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with ACL
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Tear down performance test with ACL
-| ...
+| ... | IACL | ACL1 | 100_FLOWS | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4udp-ip4base-iacl1sl-100flows
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance | acl
+|
| Test Template | Local Template
-| ...
+|
| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
-| ...
+|
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| ... | with single links between nodes.
| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 100
+| ${ip_nr}= | ${10}
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
| ${port_step}= | ${1}
| ${trex_stream1_subnet}= | 10.10.10.0/24
| ${trex_stream2_subnet}= | 20.20.20.0/24
+# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4udp-10u10p-conc
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | ${ip_nr}= | Set Variable | 10
-| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| tc01-64B-1c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
+| 64B-1c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
| | [Tags] | 64B | 1C
| | frame_size=${64} | phy_cores=${1}
-| tc02-64B-2c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
+| 64B-2c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
| | [Tags] | 64B | 2C
| | frame_size=${64} | phy_cores=${2}
-| tc03-64B-4c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
+| 64B-4c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
| | [Tags] | 64B | 4C
| | frame_size=${64} | phy_cores=${4}
-| tc04-1518B-1c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
+| 1518B-1c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| tc05-1518B-2c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
+| 1518B-2c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| tc06-1518B-4c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
+| 1518B-4c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| tc07-9000B-1c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
+| 9000B-1c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
| | [Tags] | 9000B | 1C
| | frame_size=${9000} | phy_cores=${1}
-| tc08-9000B-2c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
+| 9000B-2c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
| | [Tags] | 9000B | 2C
| | frame_size=${9000} | phy_cores=${2}
-| tc09-9000B-4c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
+| 9000B-4c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
| | [Tags] | 9000B | 4C
| | frame_size=${9000} | phy_cores=${4}
-| tc10-IMIX-1c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
+| IMIX-1c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| tc11-IMIX-2c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
+| IMIX-2c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| tc12-IMIX-4c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
+| IMIX-4c-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}
Code Review / csit.git / blobdiff