-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
-| ...
+|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | IACLDST
-| ...
-| Suite Setup | Setup suite single link | performance
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | IACLDST | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4-ip4base-iacldstbase
+|
+| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test
+| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | classify
-| ...
+|
| Test Template | Local Template
-| ...
-| Documentation | *RFC2544: Pkt throughput IPv4 iAcl whitelist test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+|
+| Documentation | **RFC2544: Pkt throughput IPv4 iAcl whitelist test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
-| ... | routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist
-| ... | ingress /24 filter entries applied on links TG - DUT1.
-| ... | DUT1 is tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header
-| ... | and generated payload. MAC addresses are matching MAC addresses
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
+| ... | routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist \
+| ... | ingress /24 filter entries applied on links TG - DUT1. \
+| ... | DUT1 is tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header \
+| ... | and generated payload. MAC addresses are matching MAC addresses \
| ... | of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src253
+# Traffic profile
+| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src253
*** Keywords ***
| Local Template
| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
+| |
| | ... | *Arguments:*
| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip4 | dst | 255.255.255.0
| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} | ip4 | dst
| | ... | 20.20.20.0
| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx}
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ip4 | ${table_idx}
| | And Vpp Configures Classify Session L3
| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} | ip4 | dst
| | ... | 10.10.10.0
| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1} | ${dut1_if2} | ip4 | ${table_idx}
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ip4 | ${table_idx}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| tc01-64B-1c-ethip4-ip4base-iacldstbase-ndrpdr
+| 64B-1c-ethip4-ip4base-iacldstbase-ndrpdr
| | [Tags] | 64B | 1C
| | frame_size=${64} | phy_cores=${1}
-| tc02-64B-2c-ethip4-ip4base-iacldstbase-ndrpdr
+| 64B-2c-ethip4-ip4base-iacldstbase-ndrpdr
| | [Tags] | 64B | 2C
| | frame_size=${64} | phy_cores=${2}
-| tc03-64B-4c-ethip4-ip4base-iacldstbase-ndrpdr
+| 64B-4c-ethip4-ip4base-iacldstbase-ndrpdr
| | [Tags] | 64B | 4C
| | frame_size=${64} | phy_cores=${4}
-| tc04-1518B-1c-ethip4-ip4base-iacldstbase-ndrpdr
+| 1518B-1c-ethip4-ip4base-iacldstbase-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| tc05-1518B-2c-ethip4-ip4base-iacldstbase-ndrpdr
+| 1518B-2c-ethip4-ip4base-iacldstbase-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| tc06-1518B-4c-ethip4-ip4base-iacldstbase-ndrpdr
+| 1518B-4c-ethip4-ip4base-iacldstbase-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| tc07-9000B-1c-ethip4-ip4base-iacldstbase-ndrpdr
+| 9000B-1c-ethip4-ip4base-iacldstbase-ndrpdr
| | [Tags] | 9000B | 1C
| | frame_size=${9000} | phy_cores=${1}
-| tc08-9000B-2c-ethip4-ip4base-iacldstbase-ndrpdr
+| 9000B-2c-ethip4-ip4base-iacldstbase-ndrpdr
| | [Tags] | 9000B | 2C
| | frame_size=${9000} | phy_cores=${2}
-| tc09-9000B-4c-ethip4-ip4base-iacldstbase-ndrpdr
+| 9000B-4c-ethip4-ip4base-iacldstbase-ndrpdr
| | [Tags] | 9000B | 4C
| | frame_size=${9000} | phy_cores=${4}
-| tc10-IMIX-1c-ethip4-ip4base-iacldstbase-ndrpdr
+| IMIX-1c-ethip4-ip4base-iacldstbase-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| tc11-IMIX-2c-ethip4-ip4base-iacldstbase-ndrpdr
+| IMIX-2c-ethip4-ip4base-iacldstbase-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| tc12-IMIX-4c-ethip4-ip4base-iacldstbase-ndrpdr
+| IMIX-4c-ethip4-ip4base-iacldstbase-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}
Code Review / csit.git / blobdiff