-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2023 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | UDP_SYN
-| ... | NAT44_ENDPOINT_DEPENDENT | BASE | DRV_VFIO_PCI
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | UDP | UDP_UDIR
+| ... | NAT44_ENDPOINT_DEPENDENT | SCALE | HOSTS_262144 | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4udp-nat44ed-h262144-p63-s16515072-udir
|
|
| Test Template | Local Template
|
-| Documentation | *RFC2544: Pkt throughput NAT44 endpoint-dependent mode
-| ... | performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| Documentation | **RFC2544: Pkt throughput NAT44 endpoint-dependent mode
+| ... | performance test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | one static IPv4 /${dest_mask} route entries.\
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \
+| ... | and one static IPv4 /${dest_mask} route entries. \
| ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
-| ... | contain L4 flows (uni-directional UDP flows) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contain L4 flows (uni-directional UDP flows) with all packets \
+| ... | containing Ethernet header, IPv4 header with UDP header and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
-| ... | for Network Security Device Performance\
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** Benchmarking \
+| ... | Methodology for Network Security Device Performance \
| ... | (draft-ietf-bmwg-ngfw-performance-03).
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | nat_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
# NAT settings
| ${nat_mode}= | endpoint-dependent
| ${in_net}= | 192.168.0.0
-| ${in_mask}= | ${8}
+| ${in_mask}= | ${14}
| ${out_net}= | 68.142.68.0
| ${out_net_end}= | 68.142.68.255
| ${out_mask}= | ${24}
| ${n_hosts}= | ${262144}
| ${n_ports}= | ${63}
| ${n_sessions}= | ${${n_hosts} * ${n_ports}}
+# Main heap size multiplicator
+| ${heap_size_mult}= | ${7}
# Ramp-up settings
| ${ramp_up_rate}= | ${500000}
| ${ramp_up_duration}= | ${72.7}
-# Traffic profile:
+# Traffic profile
| ${traffic_profile}= | trex-stl-ethip4udp-${n_hosts}u${n_ports}p-udir
-# Main heap size multiplicator
-| ${heap_size_mult}= | ${7}
+| ${traffic_directions}= | ${1}
*** Keywords ***
| Local Template
| |
| | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
+| | ... | - **[Cfg]** DUT runs NAT44 ${nat_mode} configuration. \
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
| |
| | ... | *Arguments:*
| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | Given Set Max Rate And Jumbo
| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs | nat_mode=${nat_mode}
-| | ${max_translations_per_thread}= | Compute Max Translations Per Thread
-| | ... | ${n_sessions} | ${thr_count_int}
-| | And Add NAT max translations per thread to all DUTs
-| | ... | ${max_translations_per_thread}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | Then Send ramp-up traffic
| | And Verify NAT44 UDP sessions number on DUT1 node
| | And Find NDR and PDR intervals using optimized search
-| | ... | traffic_directions=${1}
*** Test Cases ***
| 64B-1c-ethip4udp-nat44ed-h262144-p63-s16515072-udir-ndrpdr
Code Review / csit.git / blobdiff