-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | IP6BASE | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6-ip6base
|
-| Suite Setup | Setup suite single link | performance
+| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test
+| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance
|
| Test Template | Local Template
|
-| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and two static IPv6 /64 route entries. DUT1 and DUT2\
+| Documentation | **RFC2544: Pkt throughput IPv6 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and two static IPv6 /64 route entries. DUT1 and DUT2 \
| ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv6 header and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG. \
+| ... | on links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv6 header and static payload. MAC \
+| ... | addresses are matching MAC addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
+| ${traffic_profile}= | trex-stl-3n-ethip6-ip6src253
*** Keywords ***
| Local Template
| | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.
+| | ... | - **[Cfg]** DUT runs IPv6 routing config. \
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
| |
| | ... | *Arguments:*
| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| tc01-78B-1c-ethip6-ip6base-ndrpdr
+| 78B-1c-ethip6-ip6base-ndrpdr
| | [Tags] | 78B | 1C
| | frame_size=${78} | phy_cores=${1}
-| tc02-78B-2c-ethip6-ip6base-ndrpdr
+| 78B-2c-ethip6-ip6base-ndrpdr
| | [Tags] | 78B | 2C
| | frame_size=${78} | phy_cores=${2}
-| tc03-78B-4c-ethip6-ip6base-ndrpdr
+| 78B-4c-ethip6-ip6base-ndrpdr
| | [Tags] | 78B | 4C
| | frame_size=${78} | phy_cores=${4}
-| tc04-1518B-1c-ethip6-ip6base-ndrpdr
+| 1518B-1c-ethip6-ip6base-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| tc05-1518B-2c-ethip6-ip6base-ndrpdr
+| 1518B-2c-ethip6-ip6base-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| tc06-1518B-4c-ethip6-ip6base-ndrpdr
+| 1518B-4c-ethip6-ip6base-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| tc07-9000B-1c-ethip6-ip6base-ndrpdr
+| 9000B-1c-ethip6-ip6base-ndrpdr
| | [Tags] | 9000B | 1C
| | frame_size=${9000} | phy_cores=${1}
-| tc08-9000B-2c-ethip6-ip6base-ndrpdr
+| 9000B-2c-ethip6-ip6base-ndrpdr
| | [Tags] | 9000B | 2C
| | frame_size=${9000} | phy_cores=${2}
-| tc09-9000B-4c-ethip6-ip6base-ndrpdr
+| 9000B-4c-ethip6-ip6base-ndrpdr
| | [Tags] | 9000B | 4C
| | frame_size=${9000} | phy_cores=${4}
-| tc10-IMIX-1c-ethip6-ip6base-ndrpdr
+| IMIX-1c-ethip6-ip6base-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| tc11-IMIX-2c-ethip6-ip6base-ndrpdr
+| IMIX-2c-ethip6-ip6base-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| tc12-IMIX-4c-ethip6-ip6base-ndrpdr
+| IMIX-4c-ethip6-ip6base-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}
Code Review / csit.git / blobdiff