Support suite tags in autogen

[csit.git] / tests / vpp / perf / ip6 / 2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot

diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot
index 84f91d6..240d07d 100644 (file)
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot
@@ -13,40 +13,43 @@
 
 *** Settings ***
 | Resource | resources/libraries/robot/shared/default.robot
-| ...
+|
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | IP6BASE
-| ...
+| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | IP6BASE | DRV_VFIO_PCI
+| ... | ethip6-ip6base
+|
 | Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
 | Test Setup | Setup test
 | Test Teardown | Tear down test | performance
-| ...
+|
 | Test Template | Local Template
-| ...
-| Documentation | *Packet throughput routing test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+|
+| Documentation | *Packet throughput IPv6 routing test cases*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
 | ... | with single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and two
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and two\
 | ... | static IPv6 /64 route entries. DUT1 tested with ${nic_name}.\
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
 | ... | of packets transmitted. NDR and PDR are discovered for different\
 | ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with\
-| ... | all packets containing Ethernet header,IPv6 header with static payload.\
-| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per\
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
+| ... | addresses of the TG node interfaces.
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
 | ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
 | ${overhead}= | ${0}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n-ethip6-ip6src253
@@ -57,21 +60,23 @@
 | | ... | [Cfg] DUT runs IPv6 routing config.\
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
 | | ... |   Type: integer, string
 | | ... | - phy_cores - Number of physical cores. Type: integer
 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
 | | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
 | | And Initialize IPv6 forwarding in circular topology
 | | Then Find NDR and PDR intervals using optimized search