-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2023 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
| ... | IACL | ACL50 | 100_FLOWS | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | eth-l2bdbasemaclrn-iacl50sf-100flows
|
-| Suite Setup | Setup suite single link | performance
+| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test
+| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | acl
|
| Test Template | Local Template
|
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${trex_stream1_subnet}= | 10.10.10.0/24
| ${trex_stream2_subnet}= | 20.20.20.0/24
# Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip4udp-10u10p-conc
+| ${traffic_profile}= | trex-stl-ethip4udp-10u10p-conc
*** Keywords ***
| Local Template
| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
| |
| | ... | *Arguments:*
| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| tc01-64B-1c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
+| 64B-1c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
| | [Tags] | 64B | 1C
| | frame_size=${64} | phy_cores=${1}
-| tc02-64B-2c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
+| 64B-2c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
| | [Tags] | 64B | 2C
| | frame_size=${64} | phy_cores=${2}
-| tc03-64B-4c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
+| 64B-4c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
| | [Tags] | 64B | 4C
| | frame_size=${64} | phy_cores=${4}
-| tc04-1518B-1c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
+| 1518B-1c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| tc05-1518B-2c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
+| 1518B-2c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| tc06-1518B-4c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
+| 1518B-4c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| tc07-9000B-1c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
+| 9000B-1c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
| | [Tags] | 9000B | 1C
| | frame_size=${9000} | phy_cores=${1}
-| tc08-9000B-2c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
+| 9000B-2c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
| | [Tags] | 9000B | 2C
| | frame_size=${9000} | phy_cores=${2}
-| tc09-9000B-4c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
+| 9000B-4c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
| | [Tags] | 9000B | 4C
| | frame_size=${9000} | phy_cores=${4}
-| tc10-IMIX-1c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
+| IMIX-1c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| tc11-IMIX-2c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
+| IMIX-2c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| tc12-IMIX-4c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
+| IMIX-4c-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}