-# Copyright (c) 2018 Cisco and/or its affiliates.
+# Copyright (c) 2023 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
# limitations under the License.
*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
+| Resource | resources/libraries/robot/shared/default.robot
+|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL50 | 10k_FLOWS
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 3-node performance topology with DUT's NIC model | L2
-| ... | Intel-X710
-| ... | AND | Set up performance test suite with ACL
-| ...
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Setup | Set up performance test
-| ...
-| Test Teardown | Tear down performance discovery test | ${min_rate}pps
-| ... | ${framesize} | ${traffic_profile}
-| ...
+| ... | IACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | eth-l2bdbasemaclrn-iacl50sf-10kflows
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance | acl
+|
| Test Template | Local Template
-| ...
-| Documentation | *RFC2544: Pkt throughput L2BD test cases with ACL*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with 2p10GE NIC X710 by Intel.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
-| ... | of packets transmitted. NDR and PDR are discovered for different
-| ... | Ethernet L2 frame sizes using MLRsearch library.
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+|
+| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \
+| ... | IPv4.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \
+| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\
+| ... | connects. \
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with UDP header \
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
*** Variables ***
-# X710-DA2 bandwidth limit
-| ${s_limit}= | ${10000000000}
-
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L2
+| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 50
| ${flows_per_dir}= | 10k
-
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
| ${port_step}= | ${1}
| ${trex_stream1_subnet}= | 10.10.10.0/24
| ${trex_stream2_subnet}= | 20.20.20.0/24
-
# Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc
+| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc
*** Keywords ***
| Local Template
| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy
+| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \
| | ... | core(s).
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
+| |
| | ... | *Arguments:*
-| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate} | ${10000}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
-| | ... | ${s_limit} | ${framesize}
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology
| | Then Find NDR and PDR intervals using optimized search
-| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
*** Test Cases ***
-| tc01-64B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| 64B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
| | [Tags] | 64B | 1C
-| | framesize=${64} | phy_cores=${1}
+| | frame_size=${64} | phy_cores=${1}
-| tc02-64B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| 64B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
| | [Tags] | 64B | 2C
-| | framesize=${64} | phy_cores=${2}
+| | frame_size=${64} | phy_cores=${2}
-| tc03-64B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| 64B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
| | [Tags] | 64B | 4C
-| | framesize=${64} | phy_cores=${4}
+| | frame_size=${64} | phy_cores=${4}
-| tc04-1518B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| 1518B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
| | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
+| | frame_size=${1518} | phy_cores=${1}
-| tc05-1518B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| 1518B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
| | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
+| | frame_size=${1518} | phy_cores=${2}
-| tc06-1518B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| 1518B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
| | [Tags] | 1518B | 4C
-| | framesize=${1518} | phy_cores=${4}
+| | frame_size=${1518} | phy_cores=${4}
-| tc07-9000B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| 9000B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
| | [Tags] | 9000B | 1C
-| | framesize=${9000} | phy_cores=${1}
+| | frame_size=${9000} | phy_cores=${1}
-| tc08-9000B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| 9000B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
| | [Tags] | 9000B | 2C
-| | framesize=${9000} | phy_cores=${2}
+| | frame_size=${9000} | phy_cores=${2}
-| tc09-9000B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| 9000B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
| | [Tags] | 9000B | 4C
-| | framesize=${9000} | phy_cores=${4}
+| | frame_size=${9000} | phy_cores=${4}
-| tc10-IMIX-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| IMIX-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
| | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| tc11-IMIX-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| IMIX-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
| | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| tc12-IMIX-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| IMIX-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
| | [Tags] | IMIX | 4C
-| | framesize=IMIX_v4_1 | phy_cores=${4}
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
Code Review / csit.git / blobdiff