Introduce pre-initialize driver layer

[csit.git] / tests / vpp / perf / l2 / 10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot
index bc26a4e..a800db7 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL1 | 10K_FLOWS
+| ... | OACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI
 | ...
 | Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
@@ -49,8 +49,10 @@
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
 | ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
 | ${overhead}= | ${0}
 # ACL test setup
 | ${acl_action}= | permit+reflect
@@ -66,11 +68,12 @@
 | ${port_step}= | ${1}
 | ${trex_stream1_subnet}= | 10.10.10.0/24
 | ${trex_stream2_subnet}= | 20.20.20.0/24
+# Traffic profile:
 | ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc
 
 *** Keywords ***
 | Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config.
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -85,11 +88,13 @@
 | | ...
 | | Set Test Variable | \${frame_size}
 | | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***