| Resource | resources/libraries/robot/performance/performance_setup.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | SCALE | L2BDBASE | FIB_100K
+| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_100K
| ...
| Suite Setup | Set up 3-node performance topology with DUT's NIC model
| ... | L2 | Intel-X710
+| ...
| Suite Teardown | Tear down 3-node performance topology
| ...
| Test Setup | Set up performance test
| ...
| Test Teardown | Tear down performance mrr test
| ...
-| Test Template | Local template
+| Test Template | Local Template
| ...
| Documentation | *Raw results for L2BD test cases*
| ...
| ... | with single links between nodes.
| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\
-| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NI
+| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC\
| ... | X710 by Intel.
| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
| ... | at line rate and reports total received/sent packets over trial period.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 50k flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses ranges are incremented as follows:
-| ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:00:c3:4f,\
-| ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:00:c3:4f,\
-| ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:00:c3:4f,\
-| ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:00:c3:4f,\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
+| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per\
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
+| ... | with IP protocol=61 and static payload.\
+| ... | MAC addresses ranges are incremented as follows:
+| ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f,
+| ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f,
+| ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f,
+| ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
| ${traffic_profile}= | trex-sl-3n-ethip4-macsrc50kdst50k
*** Keywords ***
-| Local template
+| Local Template
| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ${phy_cores} phy
-| | ... | core(s).
+| | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\
+| | ... | physical core(s) for worker threads.
| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
| | ... | trial throughput test.
| | ...
| | ...
| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
| | ...
-| | Set Test Variable | ${framesize}
-| | ${get_framesize}= | Get Frame Size | ${framesize}
-| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
-| | ...
| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
| | And Add PCI devices to all DUTs
-| | And Run Keyword If | ${get_framesize} < ${1522}
-| | ... | Add no multi seg to all DUTs
+| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
+| | ... | ${s_limit} | ${framesize}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize L2 bridge domain in 3-node circular topology
+| | When Initialize L2 bridge domain in circular topology
| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
-| tc01-64B-1t1c-eth-l2bdscale100kmaclrn-mrr
+| tc01-64B-1c-eth-l2bdscale100kmaclrn-mrr
| | [Tags] | 64B | 1C
| | framesize=${64} | phy_cores=${1}
-| tc02-1518B-1t1c-eth-l2bdscale100kmaclrn-mrr
-| | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
-
-| tc03-9000B-1t1c-eth-l2bdscale100kmaclrn-mrr
-| | [Tags] | 9000B | 1C
-| | framesize=${9000} | phy_cores=${1}
-
-| tc04-IMIX-1t1c-eth-l2bdscale100kmaclrn-mrr
-| | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
-
-| tc05-64B-2t2c-eth-l2bdscale100kmaclrn-mrr
+| tc02-64B-2c-eth-l2bdscale100kmaclrn-mrr
| | [Tags] | 64B | 2C
| | framesize=${64} | phy_cores=${2}
-| tc06-1518B-2t2c-eth-l2bdscale100kmaclrn-mrr
-| | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
-
-| tc07-9000B-2t2c-eth-l2bdscale100kmaclrn-mrr
-| | [Tags] | 9000B | 2C
-| | framesize=${9000} | phy_cores=${2}
-
-| tc08-IMIX-2t2c-eth-l2bdscale100kmaclrn-mrr
-| | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
-
-| tc09-64B-4t4c-eth-l2bdscale100kmaclrn-mrr
+| tc03-64B-4c-eth-l2bdscale100kmaclrn-mrr
| | [Tags] | 64B | 4C
| | framesize=${64} | phy_cores=${4}
-| tc10-1518B-4t4c-eth-l2bdscale100kmaclrn-mrr
+| tc04-1518B-1c-eth-l2bdscale100kmaclrn-mrr
+| | [Tags] | 1518B | 1C
+| | framesize=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-eth-l2bdscale100kmaclrn-mrr
+| | [Tags] | 1518B | 2C
+| | framesize=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-eth-l2bdscale100kmaclrn-mrr
| | [Tags] | 1518B | 4C
| | framesize=${1518} | phy_cores=${4}
-| tc11-9000B-4t4c-eth-l2bdscale100kmaclrn-mrr
+| tc07-9000B-1c-eth-l2bdscale100kmaclrn-mrr
+| | [Tags] | 9000B | 1C
+| | framesize=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-eth-l2bdscale100kmaclrn-mrr
+| | [Tags] | 9000B | 2C
+| | framesize=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-eth-l2bdscale100kmaclrn-mrr
| | [Tags] | 9000B | 4C
| | framesize=${9000} | phy_cores=${4}
-| tc12-IMIX-4t4c-eth-l2bdscale100kmaclrn-mrr
+| tc10-IMIX-1c-eth-l2bdscale100kmaclrn-mrr
+| | [Tags] | IMIX | 1C
+| | framesize=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-eth-l2bdscale100kmaclrn-mrr
+| | [Tags] | IMIX | 2C
+| | framesize=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-eth-l2bdscale100kmaclrn-mrr
| | [Tags] | IMIX | 4C
| | framesize=IMIX_v4_1 | phy_cores=${4}
Code Review / csit.git / blobdiff