-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm
|
-| Suite Setup | Setup suite single link | performance
+| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
-| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
-| ... | 1 docker container*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain \
+| ... | 1 docker container**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
| ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
-| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
-| ${dut2_if1_ip4}= | 200.0.0.1
-| ${dut2_if2_ip4}= | 192.168.20.1
+| ${dut2_if1_ip4}= | 200.0.0.101
+| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec
*** Keywords ***
| Local Template
| | [Documentation]
-| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
-| | ... | containers.
+| | ... | - **[Cfg]** DUT1 runs IPSec tunneling AES_256_GCM config to \
+| | ... | ${n_instances} containers. \
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
| |
| | ... | *Arguments:*
| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | And Initialize IPSec in 3-node circular topology
| | And Stop VPP service on all DUTs | ${nodes}
| | And VPP IPsec Create Tunnel Interfaces in Containers
-| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
-| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
-| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels}
+| | ... | ${encr_alg} | ${auth_alg} | ${laddr_ip4} | ${raddr_ip4}
+| | ... | ${addr_range} | ${n_instances}
| | And Start containers for test
| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
| | ... | pinning=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| tc01-64B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
+| 64B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
| | [Tags] | 64B | 1C
| | frame_size=${64} | phy_cores=${1}
-| tc02-64B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
+| 64B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
| | [Tags] | 64B | 2C
| | frame_size=${64} | phy_cores=${2}
-| tc03-64B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
+| 64B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
| | [Tags] | 64B | 4C
| | frame_size=${64} | phy_cores=${4}
-| tc04-1518B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
+| 1518B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| tc05-1518B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
+| 1518B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| tc06-1518B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
+| 1518B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| tc10-IMIX-1c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
+| 9000B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| tc11-IMIX-2c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
+| IMIX-2c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| tc12-IMIX-4c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
+| IMIX-4c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}
Code Review / csit.git / blobdiff