Optimize Qemu installation to speed up vhost tests

[csit.git] / tests / vpp / perf / vm_vhost / 10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
index 9d39ca3..a85c7c0 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
@@ -56,6 +56,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${subid}= | 10
 | ${tag_rewrite}= | pop-1
 | ${vlan_overhead}= | ${4}
@@ -65,10 +66,10 @@
 # X520-DA2 bandwidth limit
 | ${s_limit}= | ${10000000000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Test Cases ***
-| tc01-64B-1t1c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
+| tc01-64B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -97,13 +98,11 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
-| tc02-64B-1t1c-eth-l2xcbase-eth-2vhost-1vm-pdrdisc
+| tc02-64B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -132,14 +131,12 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
 | | ... | ${perf_pdr_loss_acceptance_type}
 
-| tc03-1518B-1t1c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
+| tc03-1518B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -168,13 +165,11 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
-| tc04-1518B-1t1c-eth-l2xcbase-eth-2vhost-1vm-pdrdisc
+| tc04-1518B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -203,14 +198,12 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
 | | ... | ${perf_pdr_loss_acceptance_type}
 
-| tc05-IMIX-1t1c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
+| tc05-IMIX-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -241,13 +234,11 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
-| tc06-IMIX-1t1c-eth-l2xcbase-eth-2vhost-1vm-pdrdisc
+| tc06-IMIX-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -278,14 +269,12 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
 | | ... | ${perf_pdr_loss_acceptance_type}
 
-| tc07-64B-2t2c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
+| tc07-64B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores,\
 | | ... | 1 receive queue per NIC port.
@@ -314,13 +303,11 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
-| tc08-64B-2t2c-eth-l2xcbase-eth-2vhost-1vm-pdrdisc
+| tc08-64B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
 | | ... | 1 receive queue per NIC port.
@@ -349,14 +336,12 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
 | | ... | ${perf_pdr_loss_acceptance_type}
 
-| tc09-1518B-2t2c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
+| tc09-1518B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores,\
 | | ... | 1 receive queue per NIC port.
@@ -385,13 +370,11 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
-| tc10-1518B-2t2c-eth-l2xcbase-eth-2vhost-1vm-pdrdisc
+| tc10-1518B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
 | | ... | 1 receive queue per NIC port.
@@ -420,14 +403,12 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
 | | ... | ${perf_pdr_loss_acceptance_type}
 
-| tc11-IMIX-2t2c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
+| tc11-IMIX-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
 | | ... | 1 receive queue per NIC port.
@@ -458,13 +439,11 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
-| tc12-IMIX-2t2c-eth-l2xcbase-eth-2vhost-1vm-pdrdisc
+| tc12-IMIX-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
 | | ... | 1 receive queue per NIC port.
@@ -495,14 +474,12 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
 | | ... | ${perf_pdr_loss_acceptance_type}
 
-| tc13-64B-4t4c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
+| tc13-64B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\
 | | ... | 2 receive queues per NIC port.
@@ -531,13 +508,11 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
-| tc14-64B-4t4c-eth-l2xcbase-eth-2vhost-1vm-pdrdisc
+| tc14-64B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\
 | | ... | 2 receive queues per NIC port.
@@ -566,14 +541,12 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
 | | ... | ${perf_pdr_loss_acceptance_type}
 
-| tc15-1518B-4t4c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
+| tc15-1518B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\
 | | ... | 2 receive queues per NIC port.
@@ -602,13 +575,11 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
-| tc16-1518B-4t4c-eth-l2xcbase-eth-2vhost-1vm-pdrdisc
+| tc16-1518B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\
 | | ... | 2 receive queues per NIC port.
@@ -637,14 +608,12 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
 | | ... | ${perf_pdr_loss_acceptance_type}
 
-| tc17-IMIX-4t4c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
+| tc17-IMIX-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\
 | | ... | 2 receive queues per NIC port.
@@ -675,13 +644,11 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
-| tc18-IMIX-4t4c-eth-l2xcbase-eth-2vhost-1vm-pdrdisc
+| tc18-IMIX-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\
 | | ... | 2 receive queues per NIC port.
@@ -712,8 +679,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}