-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
# limitations under the License.
*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
+| Resource | resources/libraries/robot/shared/default.robot
+|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM
| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34
-| ... | LBOND_1L
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 3-node performance topology with DUT's NIC model | L2
-| ... | ${nic_name}
-| ... | AND | Set up performance test suite with LACP mode link bonding
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Tear down performance test with vhost
-| ...
+| ... | LBOND_1L | VM_TESTPMD | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | 1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance | vhost
+|
| Test Template | Local Template
-| ...
+|
| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost and vpp
| ... | link bonding*
-| ...
+|
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | with single links between nodes.
| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. 802.1q
| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP
| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and
| ... | DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are \
-| ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
+| ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \
| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
| ... | tested with ${nic_name}.
| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
| ${bd_id1}= | 1
| ${bd_id2}= | 2
# Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254
*** Keywords ***
| Local Template
| | ... | [Cfg] DUT runs L2BD switching config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| | Set Test Variable | ${vlan_strip_off} | ${TRUE}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid}
| | ... | ${tag_rewrite} | ${bond_mode} | ${lb_mode}
| | And Configure chains of NFs connected via vhost-user
| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
-| | ... | use_tuned_cfs=${False} | auto_scale=${True} | vnf=vpp_chain_l2xc
+| | ... | use_tuned_cfs=${False} | auto_scale=${True} | vnf=testpmd_io
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| tc01-64B-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
+| 64B-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
| | [Tags] | 64B | 1C
| | frame_size=${64} | phy_cores=${1}
-| tc02-64B-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
+| 64B-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
| | [Tags] | 64B | 2C
| | frame_size=${64} | phy_cores=${2}
-| tc03-64B-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
+| 64B-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
| | [Tags] | 64B | 4C
| | frame_size=${64} | phy_cores=${4}
-| tc04-1518B-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
+| 1518B-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| tc05-1518B-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
+| 1518B-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| tc06-1518B-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
+| 1518B-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| tc07-9000B-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
+| 9000B-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
| | [Tags] | 9000B | 1C
| | frame_size=${9000} | phy_cores=${1}
-| tc08-9000B-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
+| 9000B-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
| | [Tags] | 9000B | 2C
| | frame_size=${9000} | phy_cores=${2}
-| tc09-9000B-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
+| 9000B-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
| | [Tags] | 9000B | 4C
| | frame_size=${9000} | phy_cores=${4}
-| tc10-IMIX-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
+| IMIX-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| tc11-IMIX-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
+| IMIX-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| tc12-IMIX-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
+| IMIX-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}
Code Review / csit.git / blobdiff