Refactor perf test cases

[csit.git] / tests / vpp / perf / vm_vhost / 40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot

diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
index 21b4a0e..96ad6c5 100644 (file)
--- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
@@ -39,7 +39,7 @@
 | ... | vhost-user interfaces using 5 cores pinned to cpus on NUMA1 and 2048M
 | ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
 | ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
-| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p40GE NIC XL710
+| ... | io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p40GE NIC XL710
 | ... | by Intel.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
@@ -56,26 +56,27 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
-| ${s_24.5G} | ${24500000000}
+| ${s_24.5G}= | ${24500000000}
 # XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
-| ${s_18.75Mpps} | ${18750000}
+| ${s_18.75Mpps}= | ${18750000}
 # Socket names
 | ${bd_id1}= | 1
 | ${bd_id2}= | 2
 | ${sock1}= | /tmp/sock-1-${bd_id1}
 | ${sock2}= | /tmp/sock-1-${bd_id2}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Test Cases ***
 | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames\
 | | ... | using binary search start at 40GE linerate, step 10kpps.
 | | ...
-| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
+| | [Tags] | 64B | 1C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -85,8 +86,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 1
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -97,19 +98,17 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc02-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames\
 | | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -119,8 +118,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 1
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -131,8 +130,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -140,11 +137,11 @@
 
 | tc03-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames\
 | | ... | using binary search start at 40GE linerate, step 10kpps.
 | | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
+| | [Tags] | 1518B | 1C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -154,8 +151,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 1
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -166,19 +163,17 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc04-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames\
 | | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -188,8 +183,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 1
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -200,8 +195,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -209,12 +202,12 @@
 
 | tc05-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame\
 | | ... | size using binary search start at 40GE linerate, step 10kpps.
 | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
 | | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
+| | [Tags] | IMIX | 1C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | ${10000}
@@ -224,8 +217,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 1
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -236,20 +229,18 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc06-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame\
 | | ... | size using binary search start at 40GE linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
 | | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | ${10000}
@@ -259,8 +250,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 1
+| | And Add PCI devices to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
 | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
@@ -270,8 +261,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -279,11 +268,11 @@
 
 | tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames\
 | | ... | using binary search start at 40GE linerate, step 10kpps.
 | | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | 64B | 2C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -293,8 +282,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 2
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -305,19 +294,17 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc08-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames\
 | | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -327,8 +314,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 2
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -339,8 +326,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -348,11 +333,11 @@
 
 | tc09-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames\
 | | ... | using binary search start at 40GE linerate, step 10kpps.
 | | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -362,8 +347,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 2
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -374,19 +359,17 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc10-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames\
 | | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -396,8 +379,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 2
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -408,8 +391,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -417,12 +398,12 @@
 
 | tc11-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame\
 | | ... | size using binary search start at 40GE linerate, step 10kpps.
 | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
 | | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | ${10000}
@@ -432,8 +413,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 2
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -444,20 +425,18 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc12-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame\
 | | ... | size using binary search start at 40GE linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
 | | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | ${10000}
@@ -467,8 +446,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 2
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -479,8 +458,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -488,11 +465,11 @@
 
 | tc13-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames\
 | | ... | using binary search start at 40GE linerate, step 10kpps.
 | | ...
-| | [Tags] | 64B | 4T4C | MTHREAD | NDRDISC
+| | [Tags] | 64B | 4C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -502,8 +479,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 4
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -514,19 +491,17 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc14-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames\
 | | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -536,8 +511,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 4
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -548,8 +523,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -557,11 +530,11 @@
 
 | tc15-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames\
 | | ... | using binary search start at 40GE linerate, step 10kpps.
 | | ...
-| | [Tags] | 1518B | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -571,8 +544,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 4
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -583,19 +556,17 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc16-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames\
 | | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1518B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -605,8 +576,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 4
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -617,8 +588,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -626,12 +595,12 @@
 
 | tc17-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for IMIX_v4_1 frame\
 | | ... | size using binary search start at 40GE linerate, step 10kpps.
 | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
 | | ...
-| | [Tags] | IMIX | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | ${10000}
@@ -641,8 +610,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 4
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -653,20 +622,18 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc18-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for IMIX_v4_1 frame\
 | | ... | size using binary search start at 40GE linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
 | | ...
-| | [Tags] | IMIX | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | ${10000}
@@ -676,8 +643,8 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
-| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | Given Add worker threads and rxqueues to all DUTs | 4
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology
@@ -688,8 +655,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}