X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=docs%2Freport%2Fintroduction%2Fmethodology_data_plane_throughput%2Fmethodology_mrr_throughput.rst;fp=docs%2Freport%2Fintroduction%2Fmethodology_data_plane_throughput%2Fmethodology_mrr_throughput.rst;h=0000000000000000000000000000000000000000;hp=f2a6cd57cdd1a492f2c9b363d3b20665d7869f3c;hb=374954b9d648f503f6783325a1266457953a998d;hpb=46eac7bb697e8261dba5b439a15f5a6125f31760

diff --git a/docs/report/introduction/methodology_data_plane_throughput/methodology_mrr_throughput.rst b/docs/report/introduction/methodology_data_plane_throughput/methodology_mrr_throughput.rst
deleted file mode 100644
index f2a6cd57cd..0000000000
--- a/docs/report/introduction/methodology_data_plane_throughput/methodology_mrr_throughput.rst
+++ /dev/null
@@ -1,54 +0,0 @@
-.. _mrr_throughput:
-
-MRR Throughput
-^^^^^^^^^^^^^^
-
-Maximum Receive Rate (MRR) tests are complementary to MLRsearch tests,
-as they provide a maximum "raw" throughput benchmark for development and
-testing community. MRR tests measure the packet forwarding rate under
-the maximum load offered by traffic generator over a set trial duration,
-regardless of packet loss.
-
-MRR tests are currently used for following test jobs:
-
-- Report performance comparison: 64B, IMIX for vhost, memif.
-- Daily performance trending: 64B, IMIX for vhost, memif.
-- Per-patch performance verification: 64B.
-- Initial iterations of MLRsearch and PLRsearch: 64B.
-
-Maximum offered load for specific L2 Ethernet frame size is set to
-either the maximum bi-directional link rate or tested NIC model
-capacity, as follows:
-
-- For 10GE NICs the maximum packet rate load is 2x14.88 Mpps for 64B, a
-  10GE bi-directional link rate.
-- For 25GE NICs the maximum packet rate load is 2x18.75 Mpps for 64B, a
-  25GE bi-directional link sub-rate limited by 25GE NIC used on TRex TG,
-  XXV710.
-- For 40GE NICs the maximum packet rate load is 2x18.75 Mpps for 64B, a
-  40GE bi-directional link sub-rate limited by 40GE NIC used on TRex
-  TG,XL710. Packet rate for other tested frame sizes is limited by
-  PCIeGen3 x8 bandwidth limitation of ~50Gbps.
-
-MRR test code implements multiple bursts of offered packet load and has
-two configurable burst parameters: individual trial duration and number
-of trials in a single burst. This enables more precise performance
-trending by providing more results data for analysis.
-
-Burst parameter settings vary between different tests using MRR:
-
-- MRR individual trial duration:
-
-  - Report performance comparison: 1 sec.
-  - Daily performance trending: 1 sec.
-  - Per-patch performance verification: 10 sec.
-  - Initial iteration for MLRsearch: 1 sec.
-  - Initial iteration for PLRsearch: 5.2 sec.
-
-- Number of MRR trials per burst:
-
-  - Report performance comparison: 10.
-  - Daily performance trending: 10.
-  - Per-patch performance verification: 5.
-  - Initial iteration for MLRsearch: 1.
-  - Initial iteration for PLRsearch: 1.