X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=docs%2Freport%2Fvpp_performance_tests%2Fcsit_release_notes.rst;h=35ab440c85d1a113fba5f9444b1ad7fb071f906b;hp=1c1bce17b30d72438c8ba1527b3a1c7d760b564f;hb=43480e631defcb2fa40cc35e48ee40ce31b1dd68;hpb=a5e743b7c61c9524773279c6135e835e2b640b42 diff --git a/docs/report/vpp_performance_tests/csit_release_notes.rst b/docs/report/vpp_performance_tests/csit_release_notes.rst index 1c1bce17b3..35ab440c85 100644 --- a/docs/report/vpp_performance_tests/csit_release_notes.rst +++ b/docs/report/vpp_performance_tests/csit_release_notes.rst @@ -1,238 +1,163 @@ -CSIT Release Notes -================== - -Changes in CSIT |release| -------------------------- - -#. Test environment changes in VPP data plane performance tests: - - - Further characterization and optimizations of VPP vhost-user and VM test - methodology and test environment; - - - Tests with varying Qemu virtio queue (a.k.a. vring) sizes: - [vr256] default 256 descriptors, [vr1024] 1024 descriptors to - optimize for packet throughput; - - - Tests with varying Linux :abbr:`CFS (Completely Fair Scheduler)` - settings: [cfs] default settings, [cfsrr1] :abbr:`CFS (Completely Fair - Scheduler)` RoundRobin(1) policy applied to all data plane threads - handling test packet path including all VPP worker threads and all Qemu - testpmd poll-mode threads; - - - Resulting test cases are all combinations with [vr256,vr1024] and - [cfs,cfsrr1] settings; - - - For more detail see performance results observations section in - this report; - -#. Code updates and optimizations in CSIT performance framework: - - - Complete CSIT framework code revision and optimizations as descried - on CSIT wiki page `Design_Optimizations - `_. - - - For more detail see the :ref:`CSIT Framework Design ` section - in this report; - -#. Changes to CSIT driver for TRex Traffic Generator: - - - Complete refactor of TRex CSIT driver; - - - Introduction of packet traffic profiles to improve usability and - manageability of traffic profiles for a growing number of test - scenarios. - - - Support for packet traffic profiles to test IPv4/IPv6 stateful and - stateless DUT data plane features; - -#. Added VPP performance tests - - - **Linux Container VPP memif virtual interface tests** - - - New VPP Memif virtual interface (shared memory interface) tests - with L2 Bridge-Domain switched-forwarding; - - - **Stateful Security Groups** - - - New m-thread m-core VPP stateful security-groups tests; - - - **MAC-IP binding** - - - New MACIP iACL single-thread single-core and m-thread m-core tests; - - - Statistical analysis of repeatibility of results; - -Performance Improvements ------------------------- - -Substantial improvements in measured packet throughput have been observed in a -number of CSIT |release| tests listed below, with relative increase of -double-digit percentage points. Relative improvements for this release are -calculated against the test results listed in CSIT |release-1| report. The -comparison is calculated between the mean values based on collected and -archived test results' samples for involved VPP releases. Standard deviation -has been also listed for CSIT |release|. VPP-16.09 and VPP-17.01 numbers are -provided for reference. - -NDR Throughput -~~~~~~~~~~~~~~ - -Non-Drop Rate Throughput discovery tests: - -.. only:: html - - .. csv-table:: - :align: center - :file: performance_improvements/performance_improvements_ndr_top.csv - -.. only:: latex - - .. raw:: latex - - \makeatletter - \csvset{ - perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead}, - } - \makeatother - - {\tiny - \csvautobooklongtable[separator=comma, - respect all, - no check column count, - perfimprovements column width=1cm, - late after line={\\\hline}, - late after last line={\end{longtable}} - ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_ndr_top.csv} - } - - -PDR Throughput -~~~~~~~~~~~~~~ - -Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%: - -.. only:: html - - .. csv-table:: - :align: center - :file: performance_improvements/performance_improvements_pdr_top.csv - -.. only:: latex - - .. raw:: latex - - \makeatletter - \csvset{ - perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead}, - } - \makeatother - - {\tiny - \csvautobooklongtable[separator=comma, - respect all, - no check column count, - perfimprovements column width=1cm, - late after line={\\\hline}, - late after last line={\end{longtable}} - ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_pdr_top.csv} - } - - -Measured improvements are in line with VPP code optimizations listed in -`VPP-17.10 release notes -`_. - -Other Performance Changes -------------------------- - -Other changes in measured packet throughput, with either minor relative increase -or decrease, have been observed in a number of CSIT |release| tests listed -below. Relative changes are calculated against the test results listed in CSIT -|release-1| report. - -NDR Throughput -~~~~~~~~~~~~~~ - -Non-Drop Rate Throughput discovery tests: - -.. only:: html - - .. csv-table:: - :align: center - :file: performance_improvements/performance_improvements_ndr_low.csv - -.. only:: latex - - .. raw:: latex - - \makeatletter - \csvset{ - perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead}, - } - \makeatother - - {\tiny - \csvautobooklongtable[separator=comma, - respect all, - no check column count, - perfimprovements column width=1cm, - late after line={\\\hline}, - late after last line={\end{longtable}} - ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_ndr_low.csv} - } - - -PDR Throughput -~~~~~~~~~~~~~~ - -Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%: - -.. only:: html - - .. csv-table:: - :align: center - :file: performance_improvements/performance_improvements_pdr_low.csv - -.. only:: latex - - .. raw:: latex - - \makeatletter - \csvset{ - perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead}, - } - \makeatother - - {\tiny - \csvautobooklongtable[separator=comma, - respect all, - no check column count, - perfimprovements column width=1cm, - late after line={\\\hline}, - late after last line={\end{longtable}} - ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_pdr_low.csv} - } - - -Known Issues ------------- - -Here is the list of known issues in CSIT |release| for VPP performance tests: - -+---+-------------------------------------------------+------------+-----------------------------------------------------------------+ -| # | Issue | Jira ID | Description | -+---+-------------------------------------------------+------------+-----------------------------------------------------------------+ -| 1 | Vic1385 and Vic1227 low performance. | VPP-664 | Low NDR performance. | -| | | | | -+---+-------------------------------------------------+------------+-----------------------------------------------------------------+ -| 2 | Sporadic NDR discovery test failures on x520. | CSIT-750 | Suspected issue with HW settings (BIOS, FW) in LF | -| | | | infrastructure. Issue can't be replicated outside LF. | -+---+-------------------------------------------------+------------+-----------------------------------------------------------------+ -| 3 | VPP in 2t2c setups - large variation | CSIT-568 | Suspected NIC firmware or DPDK driver issue affecting NDR | -| | of discovered NDR throughput values across | | throughput. Applies to XL710 and X710 NICs, x520 NICs are fine. | -| | multiple test runs with xl710 and x710 NICs. | | | -+---+-------------------------------------------------+------------+-----------------------------------------------------------------+ -| 4 | Lower than expected NDR and PDR throughput with | CSIT-569 | Suspected NIC firmware or DPDK driver issue affecting NDR and | -| | xl710 and x710 NICs, compared to x520 NICs. | | PDR throughput. Applies to XL710 and X710 NICs. | -+---+-------------------------------------------------+------------+-----------------------------------------------------------------+ - +Release Notes +============= + +Changes in CSIT |release| +------------------------- + +#. **VPP performance tests** + + - *MRR tests* - New Maximum Receive Rate tests measure the packet + forwarding rate under the maximum load offered by traffic + generator over a set trial duration, regardless of packet loss. + MRR tests are used for continuous performance trending and for + comparison between releases. + + - *Service Chaining with SRv6* - New SRv6 (Segment Routing IPv6) proxy + tests measure performance of SRv6 Endpoint fronting SR-unaware + appliance via masquerading (End.AM), dynamic proxy (End.AD) or + static proxy (End.AS) SR functions. + +#. **Presentation and Analytics Layer** + + - *Performance trending* - Added continuous performance trending and + analysis. New Performance Trending and Performance Analysis jobs + executed regular throughput tests, with results being subsequently + analysed and trend and anomalies summarized and presented in VPP + Performance Dashboard and trendline graphs. + +#. **Test Framework Optimizations** + + - *Performance tests efficiency* - Qemu build/install optimizations, + warmup phase handling, vpp restart handling. Resulted in improved + stability and reduced total execution time by 30% for single pkt + size e.g. 64B/78B. + + - *General code housekeeping* - ongoing RF keywords optimizations, + removal of redundant RF keywords. + +Performance Changes +------------------- + +Relative performance changes in measured packet throughput in CSIT +|release| are calculated against the results from CSIT |release-1| +report. Listed mean and standard deviation values are computed based on +a series of the same tests executed against respective VPP releases to +verify test results repeatibility, with percentage change calculated for +mean values. Note that the standard deviation is quite high for a small +number of packet throughput tests, what indicates poor test results +repeatability and makes the relative change of mean throughput value not +fully representative for these tests. The root causes behind poor +results repeatibility vary between the test cases. + +NDR Changes +~~~~~~~~~~~ + +NDR small packet throughput changes between releases are available in a +CSV and pretty ASCII formats: + + - `csv format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.csv>`_, + - `csv format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.csv>`_, + - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.txt>`_, + - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.txt>`_. + +.. note:: + + Test results have been generated by + `FD.io test executor vpp performance jobs`_ with Robot Framework result + files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_. + +PDR Changes +~~~~~~~~~~~ + +NDR small packet throughput changes between releases are available in a +CSV and pretty ASCII formats: + + - `csv format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.csv>`_, + - `csv format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.csv>`_, + - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.txt>`_, + - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.txt>`_. + +.. note:: + + Test results have been generated by + `FD.io test executor vpp performance jobs`_ with Robot Framework result + files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_. + +MRR Changes +~~~~~~~~~~~ + +MRR small packet throughput changes between releases are available in a +CSV and pretty ASCII formats: + + - `csv format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.csv>`_, + - `csv format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.csv>`_, + - `csv format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.csv>`_, + - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.txt>`_, + - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.txt>`_, + - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.txt>`_. + +.. note:: + + Test results have been generated by + `FD.io test executor vpp mrr jobs `_ + with Robot Framework result files csit-vpp-perf-mrr-daily-master__*__output.xml.gz + `archived here `_. + +Comparison Across Testbeds +-------------------------- + +.. warning:: + + TODO: Add: + + Table 1. + Test Case 3-Node Hsw 3-Node Skx Skx vs. Hsw Delta [%] + + Table 2. + Test Case 3-Node Skx 2-Node Skx 2-Node vs. 3-Node Delta [%] + +Throughput Trending +------------------- + +In addition to reporting throughput changes between VPP releases, CSIT +provides continuous performance trending for VPP master branch: + +#. `VPP Performance Dashboard `_ + - per VPP test case throughput trend, trend compliance and summary of + detected anomalies. + +#. `Trending Methodology `_ + - throughput test metrics, trend calculations and anomaly + classification (progression, regression, outlier). + +#. `Trendline Graphs `_ + - per VPP build MRR throughput measurements against the trendline + with anomaly highlights, with associated CSIT test jobs. + +Known Issues +------------ + +List of known issues in CSIT |release| for VPP performance tests: + ++---+-------------------------------------------------+------------+-----------------------------------------------------------------+ +| # | Issue | Jira ID | Description | ++===+=================================================+============+=================================================================+ +| 1 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570 | DPDK reporting rx-errors, indicating L1 issue. Suspected issue | +| | on x520. | | with HW combination of X710-X520 in LF testbeds. Not observed | +| | | | outside of LF testbeds. | ++---+-------------------------------------------------+------------+-----------------------------------------------------------------+ +| 2 | Lower than expected NDR throughput of DPDK | CSIT-571 | Suspected NIC firmware or DPDK driver issue affecting NDR and | +| | testpmd and VPP L2 path NDR throughput with | | PDR throughput on XL710 and X710 NICs. | +| | xl710 and x710 NICs, compared to x520 NICs. | | | ++---+-------------------------------------------------+------------+-----------------------------------------------------------------+ +| 3 | Tagged Ethernet dot1q and dot1ad L2 path | CSIT-1066 | Tagged Ethernet dot1q and dot1ad L2 path throughput regression: | +| | throughput regression. | | NDR -2%..-5%, PDR -2%..-6%, MRR. Affects l2xc and l2bd | +| | | | performance tests. | ++---+-------------------------------------------------+------------+-----------------------------------------------------------------+ +| 4 | IPSec (software, no QAT HW) throughput | CSIT-1064 | IPSec throughput regression: NDR -3%..-8%, PDR -2%..-8%, MRR | +| | regression. | | -3%..-7%. Affects IPSec SW tests, QAT HW tests not affected. | ++---+-------------------------------------------------+------------+-----------------------------------------------------------------+ +| 5 | High failure rate of creating working container | CSIT-1065 | About 20% of orchestrated container topology tests failing data | +| | topologies with K8s/Ligato orchestration. | | plane verification indicating configuration issue. Suspected | +| | | | issue with Ligato vpp-agent. | ++---+-------------------------------------------------+------------+-----------------------------------------------------------------+