X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=docs%2Freport%2Fvpp_performance_tests%2Fcsit_release_notes.rst;h=377bd30d3fc957a47f9d43d561ee2928e6850a4e;hp=54275314e3e704a31e163511371e2102e50f6b00;hb=7577a3ff000ba4c61394bc49754a257fbb3d31ef;hpb=f4cd1c230a2328fd647fd88da5d9149fbad556e3 diff --git a/docs/report/vpp_performance_tests/csit_release_notes.rst b/docs/report/vpp_performance_tests/csit_release_notes.rst index 54275314e3..377bd30d3f 100644 --- a/docs/report/vpp_performance_tests/csit_release_notes.rst +++ b/docs/report/vpp_performance_tests/csit_release_notes.rst @@ -4,221 +4,147 @@ CSIT Release Notes Changes in CSIT |release| ------------------------- -#. Added VPP performance tests +#. **VPP performance tests** - - **Container Topologies Orchestrated by K8s with VPP memif tests** + - *MRR tests* - New Maximum Receive Rate tests measure the packet + forwarding rate under the maximum load offered by traffic + generator over a set trial duration, regardless of packet loss. + MRR tests are used for continuous performance trending and for + comparison between releases. - - Added tests with VPP in L2 Cross-Connect and Bridge-Domain - configurations containers, with service chain topologies orchestrated by - Kubernetes. Added following forwarding topologies: i) "Parallel" with - packets flowing from NIC via VPP to container and back to VPP and NIC; - ii) "Chained" a.k.a. "Snake" with packets flowing via VPP to container, - back to VPP, to next container, back to VPP and so on until the last - container in chain, then back to VPP and NIC; iii) "Horizontal" with - packets flowing via VPP to container, then via "horizontal" memif to - next container, and so on until the last container, then back to VPP and - NIC;. + - *Service Chaining with SRv6* - New SRv6 (Segment Routing IPv6) proxy + tests measure performance of SRv6 Endpoint fronting SR-unaware + appliance via masquerading (End.AM), dynamic proxy (End.AD) or + static proxy (End.AS) SR functions. - - **VPP TCP/IP stack** +#. **Presentation and Analytics Layer** - - Added tests for VPP TCP/IP stack using VPP built-in HTTP server. - WRK traffic generator is used as a client-side. + - *Performance trending* - Added continuous performance trending and + analysis. New Performance Trending and Performance Analysis jobs + executed regular throughput tests, with results being subsequently + analysed and trend and anomalies summarized and presented in VPP + Performance Dashboard and trendline graphs. - - **SRv6 tests** +#. **Test Framework Optimizations** - - Initial SRv6 tests verifying performance of SRv6 encapsulation and - decapsulation and SID lookups. + - *Performance tests efficiency* - Qemu build/install optimizations, + warmup phase handling, vpp restart handling. Resulted in improved + stability and reduced total execution time by 30% for single pkt + size e.g. 64B/78B. - - **IPSecSW tests** + - *General code housekeeping* - ongoing RF keywords optimizations, + removal of redundant RF keywords. - - SW computed IPSec encryption with AES-GCM, CBC-SHA1 ciphers, in - combination with IPv4 routed-forwarding. +Performance Changes +------------------- -#. Presentation and Analytics Layer +Relative performance changes in measured packet throughput in CSIT +|release| are calculated against the results from CSIT |release-1| +report. Listed mean and standard deviation values are computed based on +a series of the same tests executed against respective VPP releases to +verify test results repeatibility, with percentage change calculated for +mean values. Note that the standard deviation is quite high for a small +number of packet throughput tests, what indicates poor test results +repeatability and makes the relative change of mean throughput value not +fully representative for these tests. The root causes behind poor +results repeatibility vary between the test cases. - - Added throughput speedup analysis for multi-core and multi-thread - VPP tests into Presentation and Analytics Layer (PAL) for automated - CSIT test results analysis; +NDR Changes +~~~~~~~~~~~ -#. Other improvements +NDR small packet throughput changes between releases are available in a +CSV and pretty ASCII formats: - - **Framework optimizations** + - `csv format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.csv>`_, + - `csv format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.csv>`_, + - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.txt>`_, + - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.txt>`_. - - Ability to run CSIT framework on ARM architecture. +.. note:: - - Overall stability improvements. + Test results have been generated by + `FD.io test executor vpp performance jobs`_ with Robot Framework result + files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_. -Performance Improvements ------------------------- +PDR Changes +~~~~~~~~~~~ -Substantial improvements in measured packet throughput have been observed in a -number of CSIT |release| tests listed below, with relative increase of -double-digit percentage points. Relative improvements for this release are -calculated against the test results listed in CSIT |release-1| report. The -comparison is calculated between the mean values based on collected and -archived test results' samples for involved VPP releases. Standard deviation -has been also listed for CSIT |release|. Performance numbers since release -VPP-16.09 are provided for reference. +NDR small packet throughput changes between releases are available in a +CSV and pretty ASCII formats: -NDR Throughput -~~~~~~~~~~~~~~ + - `csv format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.csv>`_, + - `csv format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.csv>`_, + - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.txt>`_, + - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.txt>`_. -Non-Drop Rate Throughput discovery tests: +.. note:: -.. only:: html + Test results have been generated by + `FD.io test executor vpp performance jobs`_ with Robot Framework result + files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_. - .. csv-table:: - :align: center - :file: performance_improvements/performance_improvements_ndr_top.csv +MRR Changes +~~~~~~~~~~~ -.. only:: latex +MRR small packet throughput changes between releases are available in a +CSV and pretty ASCII formats: - .. raw:: latex + - `csv format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.csv>`_, + - `csv format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.csv>`_, + - `csv format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.csv>`_, + - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.txt>`_, + - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.txt>`_, + - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.txt>`_. - \makeatletter - \csvset{ - perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead}, - } - \makeatother +.. note:: - {\tiny - \csvautobooklongtable[separator=comma, - respect all, - no check column count, - perfimprovements column width=1cm, - late after line={\\\hline}, - late after last line={\end{longtable}} - ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_ndr_top.csv} - } + Test results have been generated by + `FD.io test executor vpp mrr jobs `_ + with Robot Framework result files csit-vpp-perf-mrr-daily-master__*__output.xml.gz + `archived here `_. +Throughput Trending +------------------- -PDR Throughput -~~~~~~~~~~~~~~ +In addition to reporting throughput changes between VPP releases, CSIT +provides continuous performance trending for VPP master branch: -Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%: +#. `VPP Performance Dashboard `_ + - per VPP test case throughput trend, trend compliance and summary of + detected anomalies. -.. only:: html - - .. csv-table:: - :align: center - :file: performance_improvements/performance_improvements_pdr_top.csv - -.. only:: latex - - .. raw:: latex - - \makeatletter - \csvset{ - perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead}, - } - \makeatother - - {\tiny - \csvautobooklongtable[separator=comma, - respect all, - no check column count, - perfimprovements column width=1cm, - late after line={\\\hline}, - late after last line={\end{longtable}} - ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_pdr_top.csv} - } - - -Measured improvements are in line with VPP code optimizations listed in -`VPP-17.10 release notes -`_. - -Other Performance Changes -------------------------- - -Other changes in measured packet throughput, with either minor relative increase -or decrease, have been observed in a number of CSIT |release| tests listed -below. Relative changes are calculated against the test results listed in CSIT -|release-1| report. - -NDR Throughput -~~~~~~~~~~~~~~ - -Non-Drop Rate Throughput discovery tests: - -.. only:: html - - .. csv-table:: - :align: center - :file: performance_improvements/performance_improvements_ndr_low.csv - -.. only:: latex - - .. raw:: latex - - \makeatletter - \csvset{ - perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead}, - } - \makeatother - - {\tiny - \csvautobooklongtable[separator=comma, - respect all, - no check column count, - perfimprovements column width=1cm, - late after line={\\\hline}, - late after last line={\end{longtable}} - ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_ndr_low.csv} - } - - -PDR Throughput -~~~~~~~~~~~~~~ - -Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%: - -.. only:: html - - .. csv-table:: - :align: center - :file: performance_improvements/performance_improvements_pdr_low.csv - -.. only:: latex - - .. raw:: latex - - \makeatletter - \csvset{ - perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead}, - } - \makeatother - - {\tiny - \csvautobooklongtable[separator=comma, - respect all, - no check column count, - perfimprovements column width=1cm, - late after line={\\\hline}, - late after last line={\end{longtable}} - ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_pdr_low.csv} - } +#. `Trending Methodology `_ + - throughput test metrics, trend calculations and anomaly + classification (progression, regression, outlier). +#. `Trendline Graphs `_ + - per VPP build MRR throughput measurements against the trendline + with anomaly highlights, with associated CSIT test jobs. Known Issues ------------ -Here is the list of known issues in CSIT |release| for VPP performance tests: +List of known issues in CSIT |release| for VPP performance tests: +---+-------------------------------------------------+------------+-----------------------------------------------------------------+ | # | Issue | Jira ID | Description | ++===+=================================================+============+=================================================================+ +| 1 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570 | DPDK reporting rx-errors, indicating L1 issue. Suspected issue | +| | on x520. | | with HW combination of X710-X520 in LF testbeds. Not observed | +| | | | outside of LF testbeds. | +---+-------------------------------------------------+------------+-----------------------------------------------------------------+ -| 1 | Vic1385 and Vic1227 low performance. | VPP-664 | Low NDR performance. | -| | | | | +| 2 | Lower than expected NDR throughput of DPDK | CSIT-571 | Suspected NIC firmware or DPDK driver issue affecting NDR and | +| | testpmd and VPP L2 path NDR throughput with | | PDR throughput on XL710 and X710 NICs. | +| | xl710 and x710 NICs, compared to x520 NICs. | | | +---+-------------------------------------------------+------------+-----------------------------------------------------------------+ -| 2 | Sporadic NDR discovery test failures on x520. | CSIT-750 | Suspected issue with HW combination of X710-X520 in LF | -| | | | infrastructure. Issue can't be replicated outside LF. | +| 3 | Tagged Ethernet dot1q and dot1ad L2 path | CSIT-1066 | Tagged Ethernet dot1q and dot1ad L2 path throughput regression: | +| | throughput regression. | | NDR -2%..-5%, PDR -2%..-6%, MRR. Affects l2xc and l2bd | +| | | | performance tests. | +---+-------------------------------------------------+------------+-----------------------------------------------------------------+ -| 3 | VPP in 2t2c setups - large variation | CSIT-568 | Suspected NIC firmware or DPDK driver issue affecting NDR | -| | of discovered NDR throughput values across | | throughput. Applies to XL710 and X710 NICs, x520 NICs are fine. | -| | multiple test runs with xl710 and x710 NICs. | | | +| 4 | IPSec (software, no QAT HW) throughput | CSIT-1064 | IPSec throughput regression: NDR -3%..-8%, PDR -2%..-8%, MRR | +| | regression. | | -3%..-7%. Affects IPSec SW tests, QAT HW tests not affected. | +---+-------------------------------------------------+------------+-----------------------------------------------------------------+ -| 4 | Lower than expected NDR throughput with | CSIT-569 | Suspected NIC firmware or DPDK driver issue affecting NDR and | -| | xl710 and x710 NICs, compared to x520 NICs. | | PDR throughput. Applies to XL710 and X710 NICs. | +| 5 | High failure rate of creating working container | CSIT-1065 | About 20% of orchestrated container topology tests failing data | +| | topologies with K8s/Ligato orchestration. | | plane verification indicating configuration issue. Suspected | +| | | | issue with Ligato vpp-agent. | +---+-------------------------------------------------+------------+-----------------------------------------------------------------+ -