X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=docs%2Freport%2Fvpp_performance_tests%2Fcsit_release_notes.rst;h=949419d393e63fbca66ee5798d871b4018bfb287;hp=74e3082f8ea7216099495c40a11bdef3f629ce67;hb=99f4ec11d4daca69501b7f6aa4aeffa61f29062a;hpb=ce1088d88744f2c040801c9852565d522b3feb68 diff --git a/docs/report/vpp_performance_tests/csit_release_notes.rst b/docs/report/vpp_performance_tests/csit_release_notes.rst index 74e3082f8e..949419d393 100644 --- a/docs/report/vpp_performance_tests/csit_release_notes.rst +++ b/docs/report/vpp_performance_tests/csit_release_notes.rst @@ -4,193 +4,109 @@ Release Notes Changes in |csit-release| ------------------------- -#. **VPP performance tests** - - - *MRR tests* - New Maximum Receive Rate tests measure the packet - forwarding rate under the maximum load offered by traffic - generator over a set trial duration, regardless of packet loss. - MRR tests are used for continuous performance trending and for - comparison between releases. - - - *Service Chaining with SRv6* - New SRv6 (Segment Routing IPv6) proxy - tests measure performance of SRv6 Endpoint fronting SR-unaware - appliance via masquerading (End.AM), dynamic proxy (End.AD) or - static proxy (End.AS) SR functions. +#. VPP PERFORMANCE TESTS -#. **Presentation and Analytics Layer** + - CSIT test environment is versioned, see + :ref:`test_environment_versioning`. - - *Performance trending* - Added continuous performance trending and - analysis. New Performance Trending and Performance Analysis jobs - executed regular throughput tests, with results being subsequently - analysed and trend and anomalies summarized and presented in VPP - Performance Dashboard and trendline graphs. + - To identify performance changes due to VPP code changes from + v20.05.0 to v20.09.0, both have been tested in CSIT environment + ver. 5 and compared against each other. All substantial + progressions has been marked up with RCA analysis. See + :ref:`vpp_compare_current_vs_previous_release` and + :ref:`vpp_known_issues`. -#. **Test Framework Optimizations** + - **NAT44 tests**: Adapted existing and added new tests. - - *Performance tests efficiency* - Qemu build/install optimizations, - warmup phase handling, vpp restart handling. Resulted in improved - stability and reduced total execution time by 30% for single pkt - size e.g. 64B/78B. + - Refactored NAT44 deterministic mode (nat44det) tests to use separate + det44 vpp plugin and to use the same scheme of inside and outside + addresses and ports, as used in new NAT44 endpoint-dependent mode tests. - - *General code housekeeping* - ongoing RF keywords optimizations, - removal of redundant RF keywords. + - Added new NAT44 endpoint-depended mode uni-directional (nat44ed-udir) + tests that measure packet throughput in one direction with usage of TRex + in stateless mode. -Performance Changes -------------------- + - Added new NAT44 endpoint-dependent mode CPS tests that measure + connections per second with usage of TRex in stateful mode. + NOTE: CPS measurement data will be added in two weeks. -Relative performance changes in measured packet throughput in |csit-release| -are calculated against the results from |csit-release-1| -report. Listed mean and standard deviation values are computed based on -a series of the same tests executed against respective VPP releases to -verify test results repeatability, with percentage change calculated for -mean values. Note that the standard deviation is quite high for a small -number of packet throughput tests, what indicates poor test results -repeatability and makes the relative change of mean throughput value not -fully representative for these tests. The root causes behind poor -results repeatability vary between the test cases. + - **IPSec async mode tests**: Added VPP performance tests for async crypto + engine. -NDR Changes -~~~~~~~~~~~ + - **AMD 2n-zn2 testbed**: New physical testbed type installed in FD.io CSIT, + VPP performance data will be added in upcoming weeks. -NDR throughput changes between releases are available in a -CSV and pretty ASCII formats: +#. TEST FRAMEWORK - - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-ndr.csv>`_, - - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-ndr.csv>`_, - - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-ndr.txt>`_, - - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-ndr.txt>`_. + - **TRex ASTF**: Added capability to run TRex in advanced stateful mode. -.. note:: + - **CSIT PAPI support**: Due to issues with PAPI performance, VAT is + still used in CSIT for all VPP scale tests. See known issues below. - Test results have been generated by - `FD.io test executor vpp performance job 3n-hsw`_, - with Robot Framework result - files csit-vpp-perf-|srelease|-\*.zip - `archived here <../_static/archive/>`_. + - **General Code Housekeeping**: Ongoing RF keywords optimizations, + removal of redundant RF keywords and aligning of suite/test + setup/teardowns. -PDR Changes -~~~~~~~~~~~ + - **Intel E810CQ 100G NIC**: Added configuration for Intel E810CQ 100G NIC. + No tests run for this NIC as it is not present in FD.io CSIT lab yet. -PDR throughput changes between releases are available in a -CSV and pretty ASCII formats: +#. PRESENTATION AND ANALYTICS LAYER - - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-pdr.csv>`_, - - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-pdr.csv>`_, - - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-pdr.txt>`_, - - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-pdr.txt>`_. + - **Graphs improvements**: Added possibility to use Gbps on Y-axis in + Packet Throughput and Speedup Multi-Core graphs, added unidirectional + mode to the Latency graphs. -.. note:: +.. raw:: latex - Test results have been generated by - `FD.io test executor vpp performance job 3n-hsw`_, - with Robot Framework result - files csit-vpp-perf-|srelease|-\*.zip - `archived here <../_static/archive/>`_. + \clearpage -MRR Changes -~~~~~~~~~~~ - -MRR small packet throughput changes between releases are available in a -CSV and pretty ASCII formats: - - - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-mrr.csv>`_, - - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-mrr.csv>`_, - - `csv format for 4t4c <../_static/vpp/performance-changes-4t4c-mrr.csv>`_, - - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-mrr.txt>`_, - - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-mrr.txt>`_, - - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-4t4c-mrr.txt>`_. - -.. note:: - - Test results have been generated by - `FD.io test executor vpp mrr jobs `_ - with Robot Framework result files csit-vpp-perf-mrr-daily-master__*__output.xml.gz - `archived here `_. - -Comparison Across Testbeds --------------------------- - -Relative performance changes in measured packet throughputon 3-Node Skx testbed -are calculated against the results measured on 3-Node Hsw testbed. - -NDR Changes -~~~~~~~~~~~ - -NDR changes between testbeds are available in a -CSV and pretty ASCII formats: - - - `csv format for ndr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-ndr.csv>`_, - - `pretty ASCII format for ndr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-ndr.txt>`_. - -.. note:: - - Test results have been generated by - `FD.io test executor vpp performance job 3n-hsw`_ and - `FD.io test executor vpp performance job 3n-skx`_ - with Robot Framework result - files csit-vpp-perf-|srelease|-\*.zip - `archived here <../_static/archive/>`_. - -PDR Changes -~~~~~~~~~~~ - -PDR throughput changes between testbeds are available in a -CSV and pretty ASCII formats: - - - `csv format for pdr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-pdr.csv>`_, - - `pretty ASCII format for pdr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-pdr.txt>`_. - -.. note:: - - Test results have been generated by - `FD.io test executor vpp performance job 3n-hsw`_ and - `FD.io test executor vpp performance job 3n-skx`_ - with Robot Framework result - files csit-vpp-perf-|srelease|-\*.zip - `archived here <../_static/archive/>`_. - -Throughput Trending -------------------- - -In addition to reporting throughput changes between VPP releases, CSIT -provides continuous performance trending for VPP master branch: - -#. `VPP Performance Dashboard `_ - - per VPP test case throughput trend, trend compliance and summary of - detected anomalies. - -#. `Trending Methodology `_ - - throughput test metrics, trend calculations and anomaly - classification (progression, regression, outlier). - -#. `Trendline Graphs `_ - - per VPP build MRR throughput measurements against the trendline - with anomaly highlights, with associated CSIT test jobs. +.. _vpp_known_issues: Known Issues ------------ -List of known issues in |csit-release| for VPP performance tests: - -+---+-------------------------------------------------+------------+-----------------------------------------------------------------+ -| # | Issue | Jira ID | Description | -+===+=================================================+============+=================================================================+ -| 1 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570 | DPDK reporting rx-errors, indicating L1 issue. Suspected issue | -| | on x520. | | with HW combination of X710-X520 in LF testbeds. Not observed | -| | | | outside of LF testbeds. | -+---+-------------------------------------------------+------------+-----------------------------------------------------------------+ -| 2 | Lower than expected NDR throughput of DPDK | CSIT-571 | Suspected NIC firmware or DPDK driver issue affecting NDR and | -| | testpmd and VPP L2 path NDR throughput with | | PDR throughput on XL710 and X710 NICs. | -| | xl710 and x710 NICs, compared to x520 NICs. | | | -+---+-------------------------------------------------+------------+-----------------------------------------------------------------+ -| 3 | Tagged Ethernet dot1q and dot1ad L2 path | CSIT-1066 | Tagged Ethernet dot1q and dot1ad L2 path throughput regression: | -| | throughput regression. | | NDR -2%..-5%, PDR -2%..-6%, MRR. Affects l2xc and l2bd | -| | | | performance tests. | -+---+-------------------------------------------------+------------+-----------------------------------------------------------------+ -| 4 | IPSec (software, no QAT HW) throughput | CSIT-1064 | IPSec throughput regression: NDR -3%..-8%, PDR -2%..-8%, MRR | -| | regression. | | -3%..-7%. Affects IPSec SW tests, QAT HW tests not affected. | -+---+-------------------------------------------------+------------+-----------------------------------------------------------------+ -| 5 | High failure rate of creating working container | CSIT-1065 | About 20% of orchestrated container topology tests failing data | -| | topologies with K8s/Ligato orchestration. | | plane verification indicating configuration issue. Suspected | -| | | | issue with Ligato vpp-agent. | -+---+-------------------------------------------------+------------+-----------------------------------------------------------------+ +List of known issues in |csit-release| for VPP performance tests: TODO: check + ++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ +| # | JiraID | Issue Description | ++====+=========================================+===========================================================================================================+ +| 1 | `CSIT-570 | Sporadic (1 in 200) NDR discovery test failures on x520. DPDK reporting rx-errors, indicating L1 issue. | +| | `_ | Suspected issue with HW combination of X710-X520 in LF testbeds. Not observed outside of LF testbeds. | ++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ +| 2 | `VPP-662 | 9000B packets not supported by NICs VIC1227 and VIC1387. | +| | `_ | | ++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ +| 3 | `CSIT-1763 | Adapt ramp-up phase of nat44 tests for different frame sizes. | +| | `_ | Currently ramp-up phase rate and duration values are correctly set for tests with 64B frame size. | ++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ +| 4 | `CSIT-1671 | All CSIT scale tests can not use PAPI due to much slower performance compared to VAT/CLI (it takes much | +| | `_ | longer to program VPP). This needs to be addressed on the PAPI side. | +| +-----------------------------------------+ The usual PAPI library spends too much time parsing arguments, so even with async processing (hundreds of | +| | `VPP-1763 | commands in flight over socket), the VPP configuration for large scale tests (millions of messages) takes | +| | `_ | too long. | ++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ +| 5 | `VPP-1675 | IPv4 IPSEC 9000B packet tests are failing as no packet is forwarded. | +| | `_ | Reason: chained buffers are not supported. | ++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ +| 6 | `VPP-1934 | [i40e] Interfaces are not brought up from carrier-down. | +| | `_ | In case of i40e -based interface (e.g Intel x700 series NIC) is bound to kernel driver (i40e) and is in | +| | | state "no-carrier" () because previously it was disabled via | +| | | "I40E_AQ_PHY_LINK_ENABLED" call, then VPP during initialization of AVF interface is not re-enabling | +| | | interface link via i40e driver to up. | +| | | CSIT implemented `workaround for AVF interface `_ until fixed. | ++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ +| 7 | `CSIT-1760 | All Mellanox / rdma driver tests are failing on LF testbed28 while successfully run on other LF testbeds. | +| | `_ | | ++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ + +Root Cause Analysis for Performance Changes +------------------------------------------- + +List of RCAs in |csit-release| for VPP performance changes: + ++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ +| # | JiraID | Issue Description | ++====+=========================================+===========================================================================================================+ +| 1 | | | +| | | | ++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+