X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=docs%2Freport%2Fvpp_performance_tests%2Fpacket_throughput_graphs%2Fip4.rst;h=6596f69e71193d04cbae1a3a95165de03751174d;hp=5f35db12480dd2aef9dce3a01099852e7e97b2d9;hb=196ed0599148d6c8ed0e2ca82ad03e129e26428a;hpb=63026fb66d761b13c4b44f4935ee30010f8856de
diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst
index 5f35db1248..6596f69e71 100644
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst
@@ -17,13 +17,31 @@ in the graph below.
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ip4-ndrdisc}
+ \label{fig:64B-1t1c-ethip4-ip4-ndrdisc}
+ \end{figure}
+
*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
CSIT source code for the test cases used for above plots can be found in CSIT
git repository:
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
- :shell:
+.. only:: html
+
+ .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
+ :shell:
+
+.. only:: latex
+
+ .. code-block:: bash
+
+ $ cd tests/vpp/perf/ip4
+ $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below.
@@ -32,14 +50,32 @@ in the graph below.
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ip4-ndrdisc}
+ \label{fig:64B-2t2c-ethip4-ip4-ndrdisc}
+ \end{figure}
+
*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4
Routed-Forwarding.*
CSIT source code for the test cases used for above plots can be found in CSIT
git repository:
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
- :shell:
+.. only:: html
+
+ .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
+ :shell:
+
+.. only:: latex
+
+ .. code-block:: bash
+
+ $ cd tests/vpp/perf/ip4
+ $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
PDR Throughput
~~~~~~~~~~~~~~
@@ -51,14 +87,32 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ip4-pdrdisc}
+ \label{fig:64B-1t1c-ethip4-ip4-pdrdisc}
+ \end{figure}
+
*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4
Routed-Forwarding.*
CSIT source code for the test cases used for above plots can be found in CSIT
git repository:
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
- :shell:
+.. only:: html
+
+ .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
+ :shell:
+
+.. only:: latex
+
+ .. code-block:: bash
+
+ $ cd tests/vpp/perf/ip4
+ $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below. PDR measured for 0.5% packet loss ratio.
@@ -67,12 +121,29 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ip4-pdrdisc}
+ \label{fig:64B-2t2c-ethip4-ip4-pdrdisc}
+ \end{figure}
+
*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4
Routed-Forwarding.*
CSIT source code for the test cases used for above plots can be found in CSIT
git repository:
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
- :shell:
+.. only:: html
+
+ .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
+ :shell:
+
+.. only:: latex
+
+ .. code-block:: bash
+ $ cd tests/vpp/perf/ip4
+ $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *