X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=docs%2Freport%2Fvpp_performance_tests%2Fpacket_throughput_graphs%2Fip6.rst;h=253993fa7bf5b12f21ce2089867338f78106f39e;hp=09a44884c22e7831f41513f3436a06140ace21b5;hb=eecad36d7d2275fa47fbcab40dbcf56108ab0a51;hpb=d9a08e59581aafe44d446b5bc1ce6ff86b2b173b

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst
index 09a44884c2..253993fa7b 100644
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst
@@ -17,24 +17,32 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-1t1c-ethip6-ip6-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-1t1c-ethip6-ip6-ndrdisc}
+            \label{fig:78B-1t1c-ethip6-ip6-ndrdisc}
+    \end{figure}
+
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. code-block:: bash
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+      :shell:
+
+.. only:: latex
 
-    $ cd $CSIT/tests/vpp/perf/ip6
-    $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+   .. code-block:: bash
 
-    10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot:| tc01-78B-1t1c-ethip6-ip6base-copwhtlistbase-ndrdisc
-    10ge2p1x520-ethip6-ip6base-iacldstbase-ndrpdrdisc.robot:| tc01-78B-1t1c-ethip6-ip6base-iacldstbase-ndrdisc
-    10ge2p1x520-ethip6-ip6base-ndrpdrdisc.robot:| tc01-78B-1t1c-ethip6-ip6base-ndrdisc
-    10ge2p1x520-ethip6-ip6scale200k-ndrpdrdisc.robot:| tc01-78B-1t1c-ethip6-ip6scale200k-ndrdisc
-    10ge2p1x520-ethip6-ip6scale20k-ndrpdrdisc.robot:| tc01-78B-1t1c-ethip6-ip6scale20k-ndrdisc
-    10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot:| tc01-78B-1t1c-ethip6-ip6scale2m-ndrdisc
-    40ge2p1xl710-ethip6-ip6base-ndrpdrdisc.robot:| tc01-78B-1t1c-ethip6-ip6base-ndrdisc
+      $ cd tests/vpp/perf/ip6
+      $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
 
 VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
@@ -43,24 +51,32 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-2t2c-ethip6-ip6-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-2t2c-ethip6-ip6-ndrdisc}
+            \label{fig:78B-2t2c-ethip6-ip6-ndrdisc}
+    \end{figure}
+
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. code-block:: bash
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+      :shell:
+
+.. only:: latex
 
-    $ cd $CSIT/tests/vpp/perf/ip6
-    $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+   .. code-block:: bash
 
-    10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot:| tc07-78B-2t2c-ethip6-ip6base-copwhtlistbase-ndrdisc
-    10ge2p1x520-ethip6-ip6base-iacldstbase-ndrpdrdisc.robot:| tc07-78B-2t2c-ethip6-ip6base-iacldstbase-ndrdisc
-    10ge2p1x520-ethip6-ip6base-ndrpdrdisc.robot:| tc07-78B-2t2c-ethip6-ip6base-ndrdisc
-    10ge2p1x520-ethip6-ip6scale200k-ndrpdrdisc.robot:| tc07-78B-2t2c-ethip6-ip6scale200k-ndrdisc
-    10ge2p1x520-ethip6-ip6scale20k-ndrpdrdisc.robot:| tc07-78B-2t2c-ethip6-ip6scale20k-ndrdisc
-    10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot:| tc07-78B-2t2c-ethip6-ip6scale2m-ndrdisc
-    40ge2p1xl710-ethip6-ip6base-ndrpdrdisc.robot:| tc07-78B-2t2c-ethip6-ip6base-ndrdisc
+      $ cd tests/vpp/perf/ip6
+      $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
 
 PDR Throughput
 ~~~~~~~~~~~~~~
@@ -72,23 +88,32 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-1t1c-ethip6-ip6-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-1t1c-ethip6-ip6-pdrdisc}
+            \label{fig:78B-1t1c-ethip6-ip6-pdrdisc}
+    \end{figure}
+
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. code-block:: bash
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
+      :shell:
+
+.. only:: latex
 
-    $ cd $CSIT/tests/vpp/perf/ip6
-    $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
+   .. code-block:: bash
 
-    10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot:| tc02-78B-1t1c-ethip6-ip6base-copwhtlistbase-pdrdisc
-    10ge2p1x520-ethip6-ip6base-iacldstbase-ndrpdrdisc.robot:| tc02-78B-1t1c-ethip6-ip6base-iacldstbase-pdrdisc
-    10ge2p1x520-ethip6-ip6base-ndrpdrdisc.robot:| tc02-78B-1t1c-ethip6-ip6base-pdrdisc
-    10ge2p1x520-ethip6-ip6scale200k-ndrpdrdisc.robot:| tc02-78B-1t1c-ethip6-ip6scale200k-pdrdisc
-    10ge2p1x520-ethip6-ip6scale20k-ndrpdrdisc.robot:| tc02-78B-1t1c-ethip6-ip6scale20k-pdrdisc
-    10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot:| tc02-78B-1t1c-ethip6-ip6scale2m-pdrdisc
+      $ cd tests/vpp/perf/ip6
+      $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
 
 VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
@@ -97,20 +122,29 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-2t2c-ethip6-ip6-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-2t2c-ethip6-ip6-pdrdisc}
+            \label{fig:78B-2t2c-ethip6-ip6-pdrdisc}
+    \end{figure}
+
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. code-block:: bash
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
+      :shell:
+
+.. only:: latex
 
-    $ cd $CSIT/tests/vpp/perf/ip6
-    $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
+   .. code-block:: bash
 
-    10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot:| tc08-78B-2t2c-ethip6-ip6base-copwhtlistbase-pdrdisc
-    10ge2p1x520-ethip6-ip6base-iacldstbase-ndrpdrdisc.robot:| tc08-78B-2t2c-ethip6-ip6base-iacldstbase-pdrdisc
-    10ge2p1x520-ethip6-ip6base-ndrpdrdisc.robot:| tc08-78B-2t2c-ethip6-ip6base-pdrdisc
-    10ge2p1x520-ethip6-ip6scale200k-ndrpdrdisc.robot:| tc08-78B-2t2c-ethip6-ip6scale200k-pdrdisc
-    10ge2p1x520-ethip6-ip6scale20k-ndrpdrdisc.robot:| tc08-78B-2t2c-ethip6-ip6scale20k-pdrdisc
-    10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot:| tc08-78B-2t2c-ethip6-ip6scale2m-pdrdisc
+      $ cd tests/vpp/perf/ip6
+      $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *