X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=docs%2Freport%2Fvpp_performance_tests%2Fpacket_throughput_graphs%2Fip6.rst;h=959559c4076aa8bad0499e227baaa06418934c3b;hp=9a756f6d42bfd117e68df8cab5ce7e3af206df3f;hb=196ed0599148d6c8ed0e2ca82ad03e129e26428a;hpb=63026fb66d761b13c4b44f4935ee30010f8856de

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst
index 9a756f6d42..959559c407 100644
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst
@@ -17,14 +17,32 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-1t1c-ethip6-ip6-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-1t1c-ethip6-ip6-ndrdisc}
+            \label{fig:78B-1t1c-ethip6-ip6-ndrdisc}
+    \end{figure}
+
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip6
+      $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
 
 VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
@@ -33,14 +51,32 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-2t2c-ethip6-ip6-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-2t2c-ethip6-ip6-ndrdisc}
+            \label{fig:78B-2t2c-ethip6-ip6-ndrdisc}
+    \end{figure}
+
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip6
+      $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
 
 PDR Throughput
 ~~~~~~~~~~~~~~
@@ -52,14 +88,32 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-1t1c-ethip6-ip6-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-1t1c-ethip6-ip6-pdrdisc}
+            \label{fig:78B-1t1c-ethip6-ip6-pdrdisc}
+    \end{figure}
+
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip6
+      $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
 
 VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
@@ -68,11 +122,29 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-2t2c-ethip6-ip6-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-2t2c-ethip6-ip6-pdrdisc}
+            \label{fig:78B-2t2c-ethip6-ip6-pdrdisc}
+    \end{figure}
+
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip6
+      $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *