X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=docs%2Freport%2Fvpp_performance_tests%2Fpacket_throughput_graphs%2Fipsec.rst;h=b59a5212278f0c74f94cade4c27de8c660c963f7;hp=eba3a40e875dbcabaa9dd1d405a12b3e9831ed68;hb=196ed0599148d6c8ed0e2ca82ad03e129e26428a;hpb=63026fb66d761b13c4b44f4935ee30010f8856de
diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
index eba3a40e87..b59a521227 100644
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
@@ -20,13 +20,31 @@ in the graph below.
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ipsechw-ndrdisc}
+ \label{fig:64B-1t1c-ipsechw-ndrdisc}
+ \end{figure}
+
*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPSEC HW.*
CSIT source code for the test cases used for above plots can be found in CSIT
git repository:
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
- :shell:
+.. only:: html
+
+ .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
+ :shell:
+
+.. only:: latex
+
+ .. code-block:: bash
+
+ $ cd tests/vpp/perf/crypto
+ $ grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below.
@@ -35,13 +53,31 @@ in the graph below.
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ipsechw-ndrdisc}
+ \label{fig:64B-2t2c-ipsechw-ndrdisc}
+ \end{figure}
+
*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPSEC HW.*
CSIT source code for the test cases used for above plots can be found in CSIT
git repository:
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
- :shell:
+.. only:: html
+
+ .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
+ :shell:
+
+.. only:: latex
+
+ .. code-block:: bash
+
+ $ cd tests/vpp/perf/crypto
+ $ grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
PDR Throughput
~~~~~~~~~~~~~~
@@ -53,13 +89,31 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ipsechw-pdrdisc}
+ \label{fig:64B-1t1c-ipsechw-pdrdisc}
+ \end{figure}
+
*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPSEC HW.*
CSIT source code for the test cases used for above plots can be found in CSIT
git repository:
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-pdrdisc" *
- :shell:
+.. only:: html
+
+ .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-pdrdisc" *
+ :shell:
+
+.. only:: latex
+
+ .. code-block:: bash
+
+ $ cd tests/vpp/perf/crypto
+ $ grep -E "64B-1t1c-.*ipsec.*-pdrdisc" *
VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below. PDR measured for 0.5% packet loss ratio.
@@ -68,10 +122,28 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ipsechw-pdrdisc}
+ \label{fig:64B-2t2c-ipsechw-pdrdisc}
+ \end{figure}
+
*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPSEC HW.*
CSIT source code for the test cases used for above plots can be found in CSIT
git repository:
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-pdrdisc" *
- :shell:
+.. only:: html
+
+ .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-pdrdisc" *
+ :shell:
+
+.. only:: latex
+
+ .. code-block:: bash
+
+ $ cd tests/vpp/perf/crypto
+ $ grep -E "64B-2t2c-.*ipsec.*-pdrdisc" *