X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=docs%2Freport%2Fvpp_performance_tests%2Fthroughput_speedup_multi_core%2Fip6.rst;h=c21f8d547cc8fa918efce48bef6aaf5f72cac1b8;hp=d17f76da24cf1e745959f43ae9da3482400b6c04;hb=b255b932218c15f2d63d7ae7bddbbd3acd00229b;hpb=f56e629f1628f938b2a6e1bf27a74375ca3839cf
diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst
index d17f76da24..c21f8d547c 100644
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst
@@ -1,5 +1,10 @@
-IPv6 Routed-Forwarding
-======================
+
+.. raw:: latex
+
+ \clearpage
+
+IPv6 Routing
+============
Following sections include Throughput Speedup Analysis for VPP multi-
core multi-thread configurations with no Hyper-Threading, specifically
@@ -9,118 +14,15 @@ used for the graphs comes from Phy-to-Phy 78B performance tests with VPP
IPv6 Routed-Forwarding, including NDR throughput (zero packet loss) and
PDR throughput (<0.5% packet loss).
-NDR Throughput
---------------
-
-VPP NDR 78B packet throughput speedup ratio is presented in the graphs
-below for 10ge2p1x520 and 40ge2p1xl710 network interface cards.
-
-
-NIC 10ge2p1x520
-~~~~~~~~~~~~~~~
-
-.. raw:: html
-
-
-
-.. raw:: latex
-
- \begin{figure}[H]
- \centering
- \graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-78B-ip6-tsa-ndrdisc}
- \label{fig:10ge2p1x520-78B-ip6-tsa-ndrdisc}
- \end{figure}
-
-*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6
- $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
-
-NIC 40ge2p1xl710
-~~~~~~~~~~~~~~~~
-
-.. raw:: html
-
-
-
-.. raw:: latex
-
- \begin{figure}[H]
- \centering
- \graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{40ge2p1xl710-78B-ip6-tsa-ndrdisc}
- \label{fig:40ge2p1xl710-78B-ip6-tsa-ndrdisc}
- \end{figure}
-
-*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6
- $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710*
-
-PDR Throughput
---------------
-
-VPP PDR 78B packet throughput speedup ratio is presented in the graphs
-below for 10ge2p1x520 and 40ge2p1xl710 network interface cards. PDR
-measured for 0.5% packet loss ratio.
-
-NIC 10ge2p1x520
-~~~~~~~~~~~~~~~
-
-.. raw:: html
-
-
-
-.. raw:: latex
-
- \begin{figure}[H]
- \centering
- \graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-78B-ip6-tsa-pdrdisc}
- \label{fig:10ge2p1x520-78B-ip6-tsa-pdrdisc}
- \end{figure}
-
-*Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-PDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-pdrdisc' 10ge2p1x520*
- :shell:
-
-.. only:: latex
+CSIT source code for the test cases used for plots can be found in
+`CSIT git repository `_.
- .. code-block:: bash
+.. toctree::
- $ cd tests/vpp/perf/ip6
- $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-pdrdisc' 10ge2p1x520*
+ ip6-3n-hsw-x520
+ ip6-3n-hsw-x710
+ ip6-3n-hsw-xl710
+ ip6-3n-skx-x710
+ ip6-2n-skx-x710
+ ip6-2n-skx-xxv710
+ ip6-2n-dnv-x553