X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=docs%2Freport%2Fvpp_performance_tests%2Fthroughput_speedup_multi_core%2Fipsec.rst;h=46d57011f3ad54e2480a4917adcaa925ab8309bb;hp=da260d009a3e8ddf2f37d07122b1399f260fdc72;hb=a245e007adcb3d6c28a2cb6aa8233038cbbcebd2;hpb=f56e629f1628f938b2a6e1bf27a74375ca3839cf

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst
index da260d009a..46d57011f3 100644
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst
@@ -1,5 +1,10 @@
-IPSec Crypto HW: IP4 Routed-Forwarding
-======================================
+
+.. raw:: latex
+
+    \clearpage
+
+IPSec IPv4 Routing
+==================
 
 Following sections include Throughput Speedup Analysis for VPP multi-
 core multi-thread configurations with no Hyper-Threading, specifically
@@ -11,85 +16,12 @@ Performance is reported for VPP running in multiple configurations of
 VPP worker thread(s), a.k.a. VPP data plane thread(s), and their
 physical CPU core(s) placement.
 
-NDR Throughput
---------------
-
-VPP NDR 64B packet throughput speedup ratio is presented in the graphs
-below for 40ge2p1xl710 network interface card.
-
-NIC 40ge2p1xl710
-~~~~~~~~~~~~~~~~
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/40ge2p1xl710-64B-ipsechw-tsa-ndrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{40ge2p1xl710-64B-ipsechw-tsa-ndrdisc}
-            \label{fig:40ge2p1xl710-64B-ipsechw-tsa-ndrdisc}
-    \end{figure}
-
-*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-NDR Throughput for Phy-to-Phy IPSEC HW.*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-(1t1c|2t2c|4t4c)-.*ipsec.*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/crypto
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-.*ipsec.*-ndrdisc" *
-
-PDR Throughput
---------------
-
-VPP PDR 64B packet throughput speedup ratio is presented in the graphs
-below for 40ge2p1xl710 network interface card.
-
-NIC 40ge2p1xl710
-~~~~~~~~~~~~~~~~
-
-VPP PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
-in the graph below. PDR measured for 0.5% packet loss ratio.
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/40ge2p1xl710-64B-ipsechw-tsa-pdrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{40ge2p1xl710-64B-ipsechw-tsa-pdrdisc}
-            \label{fig:40ge2p1xl710-64B-ipsechw-tsa-pdrdisc}
-    \end{figure}
-
-*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-PDR Throughput for Phy-to-Phy IPSEC HW.*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-(1t1c|2t2c|4t4c)-.*ipsec.*-pdrdisc" *
-      :shell:
-
-.. only:: latex
+CSIT source code for the test cases used for plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls2110>`_.
 
-   .. code-block:: bash
+.. toctree::
 
-      $ cd tests/vpp/perf/crypto
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-.*ipsec.*-pdrdisc" *
+    ipsec-3n-skx-xxv710
+    ipsec-3n-icx-e810cq
+    ipsec-3n-tsh-x520
+    ipsec-3n-dnv-x553