X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=docs%2Freport%2Fvpp_performance_tests%2Fthroughput_speedup_multi_core%2Fipsec.rst;h=f495665af2b50d444d834e192aec23cd33344ebc;hp=678e00fec56c9ee106704970b1e3095f4f6ca5d7;hb=e0806c8358f38406432d1c6f09de7b90fadb8646;hpb=4bfd1dcd604dac12d1dd00ba63c0d5e4170a1f2b
diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst
index 678e00fec5..f495665af2 100644
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst
@@ -1,5 +1,35 @@
-IPSec Crypto HW: IP4 Routed-Forwarding
-======================================
+
+.. raw:: latex
+
+ \clearpage
+
+.. raw:: html
+
+
+
+IPSec IPv4 Routing
+==================
Following sections include Throughput Speedup Analysis for VPP multi-
core multi-thread configurations with no Hyper-Threading, specifically
@@ -11,85 +41,173 @@ Performance is reported for VPP running in multiple configurations of
VPP worker thread(s), a.k.a. VPP data plane thread(s), and their
physical CPU core(s) placement.
-NDR Throughput
---------------
+CSIT source code for the test cases used for plots can be found in
+`CSIT git repository `_.
+
+.. raw:: latex
+
+ \clearpage
+
+3n-hsw-xl710
+~~~~~~~~~~~~
+
+64b-hw-base
+-----------
+
+.. raw:: html
+
+
+
+:index:`Speedup Multi-core: ipsec-3n-hsw-xl710-64b-base-ndr`
+
+.. raw:: html
+
+
+
+
+
+
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-base-ndr-tsa}
+ \label{fig:ipsec-3n-hsw-xl710-64b-base-ndr-tsa}
+ \end{figure}
+
+.. raw:: html
+
+
+
+.. raw:: latex
+
+ \clearpage
+
+:index:`Speedup Multi-core: ipsec-3n-hsw-xl710-64b-base-pdr`
+
+.. raw:: html
+
+
+
+
+
+
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-base-pdr-tsa}
+ \label{fig:ipsec-3n-hsw-xl710-64b-base-pdr-tsa}
+ \end{figure}
+
+.. raw:: latex
-VPP NDR 64B packet throughput speedup ratio is presented in the graphs
-below for 40ge2p1xl710 network interface card.
+ \clearpage
-NIC 40ge2p1xl710
-~~~~~~~~~~~~~~~~
+64b-hw-scale
+------------
.. raw:: html
-
+
+
+:index:`Speedup Multi-core: ipsec-3n-hsw-xl710-64b-scale-ndr`
+
+.. raw:: html
+
+
+
+
+
.. raw:: latex
\begin{figure}[H]
\centering
\graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{40ge2p1xl710-64B-ipsechw-tsa-ndrdisc}
- \label{fig:40ge2p1xl710-64B-ipsechw-tsa-ndrdisc}
+ \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-scale-ndr-tsa}
+ \label{fig:ipsec-3n-hsw-xl710-64b-scale-ndr-tsa}
\end{figure}
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
+.. raw:: html
+
+
+
+.. raw:: latex
+
+ \clearpage
-.. only:: html
+:index:`Speedup Multi-core: ipsec-3n-hsw-xl710-64b-scale-pdr`
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-(1t1c|2t2c|4t4c)-.*ipsec.*-ndrdisc" *
- :shell:
+.. raw:: html
+
+
+
+
+
-.. only:: latex
+.. raw:: latex
- .. code-block:: bash
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-scale-pdr-tsa}
+ \label{fig:ipsec-3n-hsw-xl710-64b-scale-pdr-tsa}
+ \end{figure}
- $ cd tests/vpp/perf/crypto
- $ grep -E "64B-(1t1c|2t2c|4t4c)-.*ipsec.*-ndrdisc" *
+.. raw:: latex
-*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-NDR Throughput for Phy-to-Phy IPSEC HW.*
+ \clearpage
-PDR Throughput
---------------
+64b-sw-base
+-----------
-VPP PDR 64B packet throughput speedup ratio is presented in the graphs
-below for 40ge2p1xl710 network interface card.
+.. raw:: html
-NIC 40ge2p1xl710
-~~~~~~~~~~~~~~~~
+
-VPP PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
-in the graph below. PDR measured for 0.5% packet loss ratio.
+:index:`Speedup Multi-core: ipsec-3n-hsw-xl710-64b-sw-base-ndr`
.. raw:: html
-
+
+
+
+
.. raw:: latex
\begin{figure}[H]
\centering
\graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{40ge2p1xl710-64B-ipsechw-tsa-pdrdisc}
- \label{fig:40ge2p1xl710-64B-ipsechw-tsa-pdrdisc}
+ \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-sw-ndr-tsa}
+ \label{fig:ipsec-3n-hsw-xl710-64b-sw-ndr-tsa}
\end{figure}
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
+.. raw:: html
-.. only:: html
+
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-(1t1c|2t2c|4t4c)-.*ipsec.*-pdrdisc" *
- :shell:
+.. raw:: latex
+
+ \clearpage
-.. only:: latex
+:index:`Speedup Multi-core: ipsec-3n-hsw-xl710-64b-sw-base-pdr`
- .. code-block:: bash
+.. raw:: html
- $ cd tests/vpp/perf/crypto
- $ grep -E "64B-(1t1c|2t2c|4t4c)-.*ipsec.*-pdrdisc" *
+
+
+
+
+
+.. raw:: latex
-*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-PDR Throughput for Phy-to-Phy IPSEC HW.*
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-sw-pdr-tsa}
+ \label{fig:ipsec-3n-hsw-xl710-64b-sw-pdr-tsa}
+ \end{figure}