X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=docs%2Ftag_documentation.rst;h=c6064c61a30bff5443e319b29a93d40e18a54588;hp=188f3b1d29bad372e643c23e8d50a16bafef3cce;hb=32188ccdce50accbb80b405c5813543a4131e744;hpb=33499c81c94c2d3baef9d3e9f061cd76ef86fa74 diff --git a/docs/tag_documentation.rst b/docs/tag_documentation.rst index 188f3b1d29..c6064c61a3 100644 --- a/docs/tag_documentation.rst +++ b/docs/tag_documentation.rst @@ -1,30 +1,560 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -Documentation for tags used to select and identify test cases. - -List of TAGs and their descriptions -=================================== +CSIT TAGs Descriptions +====================== + +All CSIT test cases are labelled with Robot Framework tags used to allow for +easy test case type identification, test case grouping and selection for +execution. Following sections list currently used CSIT TAGs and their +documentation. Topology TAGs ------------- -3_NODE_DOUBLE_LINK_TOPO +.. topic:: 3_NODE_DOUBLE_LINK_TOPO + 3 nodes connected in a circular topology with two links interconnecting the devices. +.. topic:: 3_NODE_SINGLE_LINK_TOPO + + 3 nodes connected in a circular topology with at least one link + interconnecting devices. + Objective TAGs -------------- +.. topic:: SKIP_PATCH + + Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch) + and csit-vpp-verify jobs (i.e. CSIT patch). + +.. topic:: SKIP_VPP_PATCH + + Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch). + Environment TAGs ---------------- + +.. topic:: HW_ENV + + DUTs and TGs are running on bare metal. + +.. topic:: VM_ENV + + DUTs and TGs are running in virtual environment. + +.. topic:: VPP_VM_ENV + + DUTs with VPP and capable of running Virtual Machine. + +NIC model tags +-------------- + +.. topic:: NIC_Intel-X520-DA2 + + Intel X520-DA2 NIC. + +.. topic:: NIC_Intel-XL710 + + Intel XL710 NIC. + +.. topic:: NIC_Intel-X710 + + Intel X710 NIC. + +.. topic:: NIC_Cisco-VIC-1227 + + VIC-1227 by Cisco. + +.. topic:: NIC_Cisco-VIC-1385 + + VIC-1385 by Cisco. + +Scaling TAGs +------------ + +.. topic:: FIB_20K + + 2x10,000 entries in single fib table + +.. topic:: FIB_200K + + 2x100,000 entries in single fib table + +.. topic:: FIB_2M + + 2x1,000,000 entries in single fib table + +.. topic:: TNL_1000 + + IPSec in tunnel mode - 1000 tunnels. + +.. topic:: SRC_USER_10 + + Traffic flow with 10 unique IPs (users) in one direction. + +.. topic:: SRC_USER_100 + + Traffic flow with 100 unique IPs (users) in one direction. + +.. topic:: SRC_USER_1000 + + Traffic flow with 1000 unique IPs (users) in one direction. + +.. topic:: SRC_USER_2000 + + Traffic flow with 2000 unique IPs (users) in one direction. + +.. topic:: SRC_USER_4000 + + Traffic flow with 4000 unique IPs (users) in one direction. + +.. topic:: 100_FLOWS + + Traffic stream with 100 unique flows (10 IPs/users x 10 UDP ports) in one + direction. + +.. topic:: 10k_FLOWS + + Traffic stream with 10 000 unique flows (10 IPs/users x 1000 UDP ports) in + one direction. + +.. topic:: 100k_FLOWS + + Traffic stream with 100 000 unique flows (100 IPs/users x 1000 UDP ports) in + one direction. + +Tags marking functional vs. performance of tests +------------------------------------------------ + +.. topic:: FUNCTEST + + All functional test cases. + +.. topic:: PERFTEST + + All performance test cases. + +Performance testing tags +------------------------ + +.. topic:: PDRDISC + + Partial Drop Rate evaluation of single run result, with non-zero packet + loss tolerance (LT) expressed in percentage of packets transmitted. + +.. topic:: NDRDISC + + Non Drop Rate evaluation of results. Loss acceptance of dropped packets is + set to zero lost packets. + +.. topic:: NDRCHK + + Performance tests where TG verifies DUTs' throughput at ref-NDR (reference + Non Drop Rate) with zero packet loss tolerance. + +.. topic:: NDRPDRDISC + + Find performance of DUT based on :rfc:`2544` with linear / binary / combined + search. (Previous LONG tests.) + +Ethernet frame size tags for performance tests +---------------------------------------------- + +.. topic:: 64B + + 64B frames used for test. + +.. topic:: 78B + + 78B frames used for test. + +.. topic:: IMIX + + IMIX frame sequence (28x 64B, 16x 570B, 4x 1518B) used for test. + +.. topic:: 1460B + + 1460B frames used for test. + +.. topic:: 1480B + + 1480B frames used for test. + +.. topic:: 1514B + + 1514B frames used for test. + +.. topic:: 1518B + + 1518B frames used for test. + +.. topic:: 9000B + + 9000B frames used for test. + +Test type tags +-------------- + +.. topic:: BASE + + Baseline test cases, no encapsulation, no feature(s) configured in tests. + +.. topic:: IP4BASE + + IPv4 baseline test cases, no encapsulation, no feature(s) configured in + tests. + +.. topic:: IP6BASE + + IPv6 baseline test cases, no encapsulation, no feature(s) configured in + tests. + +.. topic:: L2XCBASE + + L2XC baseline test cases, no encapsulation, no feature(s) configured in + tests. + +.. topic:: L2BDBASE + + L2BD baseline test cases, no encapsulation, no feature(s) configured in + tests. + +.. topic:: SCALE + + Scale test cases. + +.. topic:: ENCAP + + Test cases where encapsulation is used. Use also encapsulation tag(s). + +.. topic:: FEATURE + + At least one feature is configured in test cases. Use also feature tag(s). + +.. topic:: TLDK + + Functional test cases for TLDK. + +Forwarding mode tags +-------------------- + +.. topic:: L2BDMACSTAT + + VPP L2 bridge-domain, L2 MAC static. + +.. topic:: L2BDMACLRN + + VPP L2 bridge-domain, L2 MAC learning. + +.. topic:: L2XCFWD + + VPP L2 point-to-point cross-connect. + +.. topic:: IP4FWD + + VPP IPv4 routed forwarding. + +.. topic:: IP6FWD + + VPP IPv6 routed forwarding. + +Underlay tags +------------- + +.. topic:: IP4UNRLAY + + IPv4 underlay. + +.. topic:: IP6UNRLAY + + IPv6 underlay. + +.. topic:: MPLSUNRLAY + + MPLS underlay. + +Overlay tags +------------ + +.. topic:: L2OVRLAY + + L2 overlay. + +.. topic:: IP4OVRLAY + + IPv4 overlay (IPv4 payload). + +.. topic:: IP6OVRLAY + + IPv6 overlay (IPv6 payload). + +Tagging tags +------------ + +.. topic:: DOT1Q + + All test cases with dot1q. + +.. topic:: DOT1AD + + All test cases with dot1ad. + +Encapsulation tags +------------------ + +.. topic:: ETH + + All test cases with base Ethernet (no encapsulation). + +.. topic:: LISP + + All test cases with LISP. + +.. topic:: LISPGPE + + All test cases with LISP-GPE. + +.. topic:: VXLAN + + All test cases with Vxlan. + +.. topic:: VXLANGPE + + All test cases with VXLAN-GPE. + +.. topic:: GRE + + All test cases with GRE. + +.. topic:: IPSEC + + All test cases with IPSEC. + +Interface tags +-------------- + +.. topic:: PHY + + All test cases which use physical interface(s). + +.. topic:: VHOST + + All test cases which uses VHOST. + +.. topic:: VHOST_256 + + All test cases which uses VHOST with qemu queue size set to 256. + +.. topic:: VHOST_1024 + + All test cases which uses VHOST with qemu queue size set to 1024. + +.. topic:: CFS_OPT + + All test cases which uses VM with optimised scheduler policy. + +.. topic:: TUNTAP + + All test cases which uses TUN and TAP. + +.. topic:: AFPKT + + All test cases which uses AFPKT. + +.. topic:: NETMAP + + All test cases which uses Netmap. + +.. topic:: MEMIF + + All test cases which uses Memif. + +Feature tags +------------ + +.. topic:: IACLDST + + iACL destination. + +.. topic:: COPWHLIST + + COP whitelist. + +.. topic:: NAT44 + + NAT44 configured and tested. + +.. topic:: NAT64 + + NAT44 configured and tested. + +.. topic:: ACL + + ACL plugin configured and tested. + +.. topic:: IACL + + ACL plugin configured and tested on input path. + +.. topic:: OACL + + ACL plugin configured and tested on output path. + +.. topic:: ACL_STATELESS + + ACL plugin configured and tested in stateless mode (permit action). + +.. topic:: ACL_STATEFUL + + ACL plugin configured and tested in stateful mode (permit+reflect action). + +.. topic:: ACL1 + + ACL plugin configured and tested with 1 not-hitting ACE. + +.. topic:: ACL10 + + ACL plugin configured and tested with 10 not-hitting ACEs. + +.. topic:: ACL50 + + ACL plugin configured and tested with 50 not-hitting ACEs. + +Encryption tags +--------------- + +.. topic:: IPSECSW + + Crypto in software. + +.. topic:: IPSECHW + + Crypto in hardware. + +.. topic:: IPSECTRAN + + IPSec in transport mode. + +.. topic:: IPSECTUN + + IPSec in tunnel mode. + +Client-workload tags +-------------------- + +.. topic:: VM + + All test cases which use at least one virtual machine. + +.. topic:: LXC + + All test cases which use Linux container and LXC utils. + +.. topic:: DOCKER + + All test cases which use Docker as container manager. + +.. topic:: APP + + All test cases with specific APP use. + +Container orchestration tags +---------------------------- + +.. topic:: K8S + + All test cases which use Kubernetes for orchestration. + +.. topic:: SFC_CONTROLLER + + All test cases which use ligato/sfc_controller for driving configuration + of vpp inside container. + +.. topic:: VPP_AGENT + + All test cases which use Golang implementation of a control/management plane + for VPP + +.. topic:: 1VSWITCH + + VPP running in Docker container acting as VSWITCH. + +.. topic:: 1VNF + + 1 VPP running in Docker container acting as VNF work load. + +.. topic:: 2VNF + + 2 VPP running in 2 Docker containers acting as VNF work load. + +Multi-threading tags +-------------------- + +.. topic:: STHREAD + + All test cases using single poll mode thread. + +.. topic:: MTHREAD + + All test cases using more then one poll mode driver thread. + +.. topic:: 1NUMA + + All test cases with packet processing on single socket. + +.. topic:: 2NUMA + + All test cases with packet processing on two sockets. + +.. topic:: SMT + + All test cases with symmetric Multi-Threading (HyperThreading) enabled. + +.. topic:: NOSMT + + All test cases with symmetric Multi-Threading (HyperThreading) disabled. + +.. topic:: 1T1C + + 1 worker thread pinned to 1 dedicated physical core. 1 receive queue per + interface. Main thread pinned to core 0. + +.. topic:: 2T2C + + 2 worker threads pinned to 2 dedicated physical cores. 1 receive queue per + interface. Main thread pinned to core 0. + +.. topic:: 4T4C + + 4 worker threads pinned to 4 dedicated physical cores. 2 receive queues per + interface. Main thread pinned to core 0. + +.. topic:: 6T6C + + 6 worker threads pinned to 6 dedicated physical cores. 3 receive queues per + interface. Main thread pinned to core 0. + +.. topic:: 8T8C + + 8 worker threads pinned to 8 dedicated physical cores. 4 receive queues per + interface. Main thread pinned to core 0. + +Honeycomb tags +-------------- + +.. topic:: HC_FUNC + + Honeycomb functional test cases. + +.. topic:: HC_NSH + + Honeycomb NSH test cases. + +.. topic:: HC_PERSIST + + Honeycomb persistence test cases. + +.. topic:: HC_REST_ONLY + + (Exclusion tag) Honeycomb test cases that cannot be run in Netconf mode + using ODL client for Restfconf -> Netconf translation.