X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fhoneycomb%2Fl2_fib.robot;fp=resources%2Flibraries%2Frobot%2Fhoneycomb%2Fl2_fib.robot;h=0000000000000000000000000000000000000000;hp=d103d41de6786060c1e68389b0c243de57e17aee;hb=e7ad66f3147662973039caaac33015de7e0c6f8c;hpb=20cc67d5f23a7f4e05b08012bf3d3a63be4bcf63

diff --git a/resources/libraries/robot/honeycomb/l2_fib.robot b/resources/libraries/robot/honeycomb/l2_fib.robot
deleted file mode 100644
index d103d41de6..0000000000
--- a/resources/libraries/robot/honeycomb/l2_fib.robot
+++ /dev/null
@@ -1,186 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.honeycomb.HcAPIKwBridgeDomain.BridgeDomainKeywords
-| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords
-| Resource | resources/libraries/robot/honeycomb/papi.robot
-
-*** Keywords ***
-| Honeycomb adds L2 FIB entry to bridge domain
-| | [Documentation] | Add L2 FIB entry to the specified bridge domain using \
-| | ... | Honyecomb API.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - bd_name - Name of the bridge domain. Type: string
-| | ... | - l2_fib_settings - The parameters of the new L2 FIB entry. \
-| | ... | Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb adds L2 FIB entry to bridge domain \
-| | ... | \| ${nodes['DUT1']} \| test_bd \| ${l2_fib_forward_cfg} \|
-| | ...
-| | [Arguments] | ${node} | ${bd_name} | ${l2_fib_settings}
-| | ...
-| | Add L2 FIB Entry | ${node} | ${bd_name} | ${l2_fib_settings}
-
-| L2 FIB Table from Honeycomb should be empty
-| | [Documentation] | Check if the L2 FIB table in the specified bridge domain \
-| | ... | is empty.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - bd_name - Name of the bridge domain. Type: string
-| | ...
-| | ... | *Example:*
-| | ... | \| L2 FIB Table from Honeycomb should be empty \
-| | ... | \| ${nodes['DUT1']} \| test_bd \|
-| | ...
-| | [Arguments] | ${node} | ${bd_name}
-| | ...
-| | ${l2_fib_data}= | Get All L2 FIB Entries | ${node} | ${bd_name}
-| | Should be empty | ${l2_fib_data}
-
-| L2 FIB Entry from Honeycomb should be
-| | [Documentation] | Retrieves the operational data about the specified L2 \
-| | ... | FIB entry and checks if they are as expected.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - bd_name - Name of the bridge domain. Type: string
-| | ... | - l2_fib_ref_data - L2 FIB entry referential data. Type: dictionay
-| | ...
-| | ... | *Example:*
-| | ... | \| L2 FIB Entry from Honeycomb should be \
-| | ... | \| ${nodes['DUT1']} \| test_bd \| ${l2_fib_forward_oper} \|
-| | ...
-| | [Arguments] | ${node} | ${bd_name} | ${l2_fib_ref_data}
-| | ...
-| | ${l2_fib_data}= | Get L2 FIB Entry | ${node} | ${bd_name}
-| | ... | ${l2_fib_ref_data['phys-address']}
-| | Compare Data Structures | ${l2_fib_data} | ${l2_fib_ref_data}
-
-| Honeycomb removes L2 FIB entry
-| | [Documentation] | Remove the specified L2 FIB entry from the bridge \
-| | ... | domain's L2 FIB table.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - bd_name - Name of the bridge domain. Type: string
-| | ... | - mac - MAC address used as the key in L2 FIB data structure. \
-| | ... | Type: string
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb removes L2 FIB entry \
-| | ... | \| ${nodes['DUT1']} \| test_bd \
-| | ... | \| ${l2_fib_forward_oper['phys-address']} \|
-| | ...
-| | [Arguments] | ${node} | ${bd_name} | ${mac}
-| | ...
-| | Remove L2 FIB Entry | ${node} | ${bd_name} | ${mac}
-
-| Honeycomb removes all L2 FIB entries
-| | [Documentation] | Remove all L2 FIB enties from the bridge domain's L2 FIB \
-| | ... | table.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - bd_name - Name of the bridge domain. Type: string
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb removes all L2 FIB entries \
-| | ... | \| ${nodes['DUT1']} \| test_bd \|
-| | ...
-| | [Arguments] | ${node} | ${bd_name}
-| | ...
-| | Remove all L2 FIB entries | ${node} | ${bd_name}
-
-| Honeycomb fails to add wrong L2 FIB entry
-| | [Documentation] | Honeycomb tries to add a wrong L2 FIB entry and expects \
-| | ... | that it fails.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - bd_name - Name of the bridge domain. Type: string
-| | ... | - l2_fib_settings - The wrong parameters of the new L2 FIB entry. \
-| | ... | Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb fails to add wrong L2 FIB entry \
-| | ... | \| ${nodes['DUT1']} \| test_bd \| ${l2_fib_wrong_cfg} \|
-| | ...
-| | [Arguments] | ${node} | ${bd_name} | ${l2_fib_settings}
-| | ...
-| | Run keyword and expect error | *HoneycombError: * was not successful. *00.
-| | ... | Add L2 FIB Entry | ${node} | ${bd_name} | ${l2_fib_settings}
-
-| Honeycomb fails to modify L2 FIB entry
-| | [Documentation] | Honeycomb tries to modify an existing L2 FIB entry and \
-| | ... | expects to fail.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - bd_name - Name of the bridge domain. Type: string
-| | ... | - mac - MAC address used as the key in L2 FIB data structure. \
-| | ... | Type: string
-| | ... | - param - The parameter to be modified. Type: string
-| | ... | - value - The new value of the parameter. Type: string or integer
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb fails to modify L2 FIB entry \
-| | ... | \| ${nodes['DUT1']} \| test_bd \
-| | ... | \| ${l2_fib_forward_oper['phys-address']} \| action \
-| | ... | \| l2-fib-forward \|
-| | ...
-| | [Arguments] | ${node} | ${bd_name} | ${mac} | ${param} | ${value}
-| | ...
-| | Run keyword and expect error | *HoneycombError: * was not successful. *00.
-| | ... | Modify L2 FIB Entry
-| | ... | ${node} | ${bd_name} | ${mac} | ${param} | ${value}
-
-| L2 FIB entry from PAPI should be
-| | [Documentation] | Retrieves the operational data about the specified L2 \
-| | ... | FIB entry using Python API and checks if it is as expected.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - bd_index - Index of the bridge domain. Type: integer
-| | ... | - l2_fib_ref_data - L2 FIB entry referential data. Type: dictionay
-| | ...
-| | ... | *Example:*
-| | ... | \| L2 FIB entry from PAPI should be \
-| | ... | \| ${nodes['DUT1']} \| test_bd \| ${l2_fib_forward_oper} \|
-| | ...
-| | [Arguments] | ${node} | ${bd_index} | ${l2_fib_ref_data}
-| | ...
-| | ${l2_fib_data}= | Get L2 FIB entry PAPI | ${node} | ${bd_index}
-| | ... | ${l2_fib_ref_data['mac']}
-| | Compare Data Structures | ${l2_fib_data} | ${l2_fib_ref_data}
-
-| L2 FIB Table from PAPI should be empty
-| | [Documentation] | Check if the L2 FIB table in the specified bridge domain \
-| | ... | is empty. Python API is used to get operational data.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - bd_index - Index of the bridge domain. Type: integer
-| | ...
-| | ... | *Example:*
-| | ... | \| L2 FIB Table from PAPI should be empty \
-| | ... | \| ${nodes['DUT1']} \| test_bd \|
-| | ...
-| | [Arguments] | ${node} | ${bd_index}
-| | ...
-| | ${l2_fib_data}= | Get L2 FIB table PAPI | ${node} | ${bd_index}
-| | Should be empty | ${l2_fib_data}